What panel/ bellbox is it ?
Probably no one checked it before printing the manual
Probably no one checked it before printing the manual
I should have provided a context in the OP. Alarm is an existing installation, I was just reviewing the manuals.
Panel: Accenta8
Bellbox: Flashguard Xtra
The diagram is from the Flashguard manual. However it also came with a table of wirings for various panels, and they all seem to wire the same way.
If I've interpreted this at face value, if wired this way, does it mean the panel will not sound if the bellbox is opened?
Panel: Accenta8
Bellbox: Flashguard Xtra
The diagram is from the Flashguard manual. However it also came with a table of wirings for various panels, and they all seem to wire the same way.
If I've interpreted this at face value, if wired this way, does it mean the panel will not sound if the bellbox is opened?
Assume it’s wired correct
The installer (from 20+ years ago) has scribbled down the colours of the wires at both ends and they match the manual.
I see that later manuals (albeit for later models) are wired in the way we might expect.
I presume this can't be tested without opening the bellbox?
I see that later manuals (albeit for later models) are wired in the way we might expect.
I presume this can't be tested without opening the bellbox?
Bit late now …after 20 years
Get ladders out and find out …then come back ….
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local