Search results

I drained down the water at my mother in laws to move a basin and radiator. Now the central heating seems to run fine, however the hot water to all the taps keeps running dry after only a minute or so. What I do know is the copper cylinder in the airing cupboard is filling up, as water is...

I have dug out a u-trap drain by the side of my house, which previously serviced the kitchen sink. I am going to use this access to my drains for a new toilet being plumbed in upstairs. Now what I have left is a drain hole about 100mm in diameter about 250mm away from the house and about 250mm...

I tiled my first floor only last weekend. This was onto a 12mm thick WBP plywood (as unable to source any 15mm as per BALs instructions) BALs floor primer, and I used BALs flexible floor adhesive (not there rapid set stuff) and then grouted the floor 24 hours later with flexible grout. It has...

I have considered the other option of a seperate shower, however am I right in thinking they should be wired directly to the fuse board? Thanks Jeremy

Thanks for the speady response. Are there any pros and cons to each option, as it appears that the first option maybe the quickest and cheapest, however I could be wrong. Thanks jeremy

As title really when using the mixer tap for the bath everything is fine, however when trying to use the shower attachment attached to the taps you either get all hot (hot tap turned fully open and cold just slightly opened)or all cold (when the cold tap is opened up enough to bring the water...

I am just about to install a tin bath, and unlike the plastic types of bath it does not have wooden strips running around it to mount the L shaped brackets (the brackets are not included too). What do people do with these baths to connect/tie them to the wall to stop movement between the bath...

Local to me at an independant tyre specialist it cost £25 for front and rear done on a laser machine, it checks for toe in/out, camber, and caster. They even give tou a print out before and after. For just the basic tracking it is £20, so only five pounds less.

No problem, all the best and if you want any help of advice just ask.

How odd I'll will have a word with the admin.

It seems that the only reason you are considering a dish washer is to clean your chip pan, have you not considered alternative methods of cooking? That said I have always had a dishwasher and would not be without one, and agree with all that is said above. However Seimens are the same as...

Sign up on 205GTIDRIVERS.COM they will more than likely have an answer.

Hi the actual size is 5 1/4 inch or 130mm. I am a 205 enthusiast and regularly use 205GTIDRIVERS.COM. I have used the following makes Kenweed, JBL, and Alpine. I have always been very happy with the performance from all of them, however on some of them the tweeter mounted on the speakers can...

From my personal experience only lay laminate floors in places were water is not present, as eventually the laminate will blow at the joints. I know you can seal/glue these, but personally I only ever put laminate floors down in bedrooms now. HTH Jeremy

For the last eight years I have been employed in telephone banking taking a rather secondary role to my wife the bread winner whilst I helped bring up our children. However I will now be officially redundent at the end of the month due to our department closing. Anyway I have always been quite...

I't wouldn't be across the whole lenght of the front section when looking directly upwards and about 6/7 years old by any chance? Also how compatible would a Ideal Mexico Super CF 455 be as I have no idea on what the difference would be. Thanks Jeremy

Spray furniture polish over the glue residue, assuming the tape backing has come off, leave for about 10/15 mins then wipe clean with a dry cloth, repeat if necessary. If this does not work then I'm sorry I'm all out of ideas. Jeremy

Hi everyone, I never thought I would find myself turning to the power of the web for a boiler part, however as I use other forums thought there mustr be one for that too. Much to my horror the heat exchanger to my Ideal Mexico Super RS3/80 has developer a very large crack and as such needs...