Search results

Hi, would this be the value used when calculating the cable size. Could this be connected to the kitchen circuit Or a is a dedicated supply required? "Nominal Power: 5.4 kW Supply can vary depending on usage, please consult a qualified electrician for ampere requirement"

Hi I was wondering if anyone has much experience with this part of the app. I'm looking into a solution when i can monitor live access control events using a Max4 reader and then take the data from the logs to run reports etc?

I've just visited a friends house, who has just had their kitchen renovated. I noticed at one of the sockets that someone has spured off the ring, that already a had a spur on it. So there are 4 cables at the socket, 2 from the ring and 2 that go off to separate sockets. I don't believe this is...

A friend of mine is installing a down stairs toilet and he's asked about earthing the pipe work. I was just wondering when and where bonding is required. Is it dependant upon the type of consumer unit you have i.e. no RCDs?

Hi As per the title, is it fine to use a switched fused spur as the main point of controlling a light? Thanks

Hi all Was just reading an earlier post about the kitchen lighting and its got me thinking. I currently have a fan with a built in light in my bathroom. The plan was to fit 4 additional downlights. I now think it would be better to have a nice stylish led light in the centre controlled by the...

Am i correct in saying the energy supplier would normally fit the isolators that sit between the CU and the meter. I'm asking as i just received a letter from my supplier informing me that they are going to install a new smart meter. I'm guessing they won't put an isolator in as part of the...

Hi Just checking, is ok to use both/ mix 1.5mm and 1mm T&E in lighting circuit wiring? Thank you

Hi I'm in the process of installing a intruder system. The panel is going in my airing cupboard. Whats you thoughts on taking the feed from the emmersion heater/ boiler spur. Am i right in saying this is normal practice when doing domestic installs, My 2nd option is to take the feed from my...

Hi, I'm trying to source a low cost 12v n/o pir to install adjacent to a camera. This will then switch 12v to the scart trigger input to bring up the live display on a tv until the alarm clears. I've done a quick search in google. Just wondered if anyone knew a specific sites Thank you

Not sure if anyone has come across this. The software been working fine until last week. I loaded up the promgram and was met with an error messages. I reinstall the software but still no joy, just wondered if anyones comes across this.

Hi my cousin has a cheap cameras with a built in pir which connects to the scart input of his tv. When ever someone triggers the pir the images auautomatically flags up on the tv. Im wondering how I would achieve this with a more traditional setup? I have an eyeball camera and a samsung dvr.

Hi all, In the back of the regs book there's an image of a 4mm radial circuit , there is then socket wired in 2.5mm spured from a jb My question, is it OK to spur directly off a socket to feed 1 double in 2.5mm.

Hi, I recently purchased a house. The previous owner had created a utility space in what would have been a wood frame and corrugated roof car port. It's now essentially a bolted on wooden extension. The brick work of the outer wall is exposed. My wife wants to use the space for work, and would...

Just wondered why you only want the LEDs to be active in walk test as suggested in the manuals?