Search results

I have a Hisense induction hob which has worked perfect for the past 2.5ish years. Then, all of a sudden we noticed that the touch controls started to play up. So you might be boiling water then you want to turn it down to simmer but the touch Vol up/down doesn't respond. You then you have to...

I have read through quite alot of post but I'm still not 100% sure which parts faulty on my Mira Go. The drips about every 20seconds directly from the shower nozzle hole so I'm trying to figure out which part needs replacing, Shower head Or Internal part Thanks in advance

I have recently had a Main Eco Compact 30w after my Vaillant ecotec 837 plus failed after 11 years. My combi and main sink tap are at total opposite sides off the house so when I draw hot water it takes an absolute age to get from A to B. I've altered the flow of the water but it's the same. My...

My son has had an offer accepted on a semi detached property that hasa large side plot if land attached. The old lady who' selling wasn't interested in splitting the property she just wanted shut as she's very poorly and now in a rest home. Thecold lady bought the property from new when in...

I live in a detached property and the motar is perished in both gable ends between tile and bargeboard. The problem I have is, the tiles curved roof tiles overhang the wood bargeboard by a good few inches. How do you get over this with dry verge that wont sit flash to the bargeboard ?. Theres a...

Can someone recommend a doorstep camera to add to a hikvision Hilook 104g 4 camera set up. The property is a bungalow with 3 cameras fitted so I just need 4th camera attach underneath to soffit right under the door. If possible wide lense and abit less intrusive if possible than the THC-T220 I'm...

Hi all , I recently helped a friend install 3 cameras and a Hilook 104g (blue white menu's). Everything's working bar the remote access via mobile phone. I own the older Hiwatch 104g (black menu's) and tbh on Virgin port forwarding was quite easy. I then use either iVMS 4500 app or Hik Connect...

I have a switched fused spur above the kitchen work surfaces and the fused spur feeds a socket behind the washer, this fused spur and socket are now redundant as the washer is plugged in elsewere. I wanted to add an outdoor socket but wiring directly the new outdoor cable into the fused spur...

My washer suddenly stopped working about 10 minutes into a wash cycle. When I plug it back in it trips out the rcd and the machine doesn't light or anything. I checked the washer heating element and I couldn't get any continuity with the multi-meter. When I removed the element it was...

I have old Dimplex storage heaters over 35 years old, there on thier last legs and expensive to run. At some point in the next couple of years I am hoping to have gas central heating installed but until I do I need to replace the storage heaters. What are my cheapest to buy and run options and...

I need to paint an awful lot of full length wooden fencing (about 150ft) both sides. I did do it a couple of years back by brush but a swore never again so, Which is a good, easy to use/fill spray gun without spending a bucket load of cash ?. I was looking at the HVLP400 Black & Decker but...

Is there a cheaper alternative Spring clamp removal tool for the door gasket replacement that will do the job like these;- http://www.ebay.co.uk/itm/Genuine-OEM-LG-Washing-Machine-Pliars-Gasket-Clamp-383EER4001A-/281281015609?hash=item417da7af39 I have tried with screwdrivers and all sorts but...

I have stripped down my LG washer/dryer F1403RD to replace the bearings and gasket after a leak and I've come across a couple of problems. Firstly , the front outer tub is burned like it's melted at the front top so I'm pretty sure water has been leaking out the top on spin the running down the...

I'm going to change the bearings in the washer/dryer soon but after watching a couple of videos on youtube some run a thin bead of silicone over the tub gasket , some don't. What's your thought's ?. And , what are the actual bearing part numbers I need as there's a bearing manufacturing company...

I had my combi boiler recently serviced and the guy said that the gas was low 12.33mBar. We only have the one gas appliance but he left a warning note to get it sorted. He said that the pipe to the meter and to the boiler was 22mm so he couldn't understand why but after a further inspection...

My vaillant VRT 392F conked out so the engineer replaced with a like for like with a 350F as they no longer make the 392F. My question is, my old 392F timer would allow me to not only set 3 timers per day but it would also allow me to set the temp of each of these 3 on/off settings. This...

I have a SCP-SB218L-3CM 700TVL CCTV and the night vision infra red has stopped working. It works perfect in the dark so thinking it was the LED IR Infrared Illuminator Board I replaced it like for like but it's still dead. I checked the cable and that's fine on a different camera so it all...

My LG washer dryer F1403RD suddenly began making a very loud noise, does anyone know what it is (video) ?:- http://youtu.be/p7fmS8URit4 if you forward to 1min 5 seconds you can here it in cycles making the noise

I live in a detached property , as you stand facing my neighbors drive is to the left of mine 1 cars width and my drive is on my right hand side again 1 cars width, the properties are at the bottom of a sloping street and I am the last house so my house is slightly lower than my neighbors. My...

We have a LG washer/dryer model F1403RD . The washer is leaking water inside somewere and the white plastic bottom of the washer fills the eventually overflows and I have to tip the washer up to get it out then mop up. There is like grey fluff matter in the water which suggest it"s not a...