Search results

has anybody had a 3 ph supply installed into there property and roughly how much it costs . my house is running 60A when heating on and voltage drops to 220v its at 15A and 240v when heating off . is 60 A excessive in modern times ???

my mates lpg gas boiler packed in and he has bought a 40 kw combi system and he has a large lpg cooker . the old system was running on 3/4 thick wall galv pipe from tank and 15 mm copper inside . the new boiler connection is 22mm what size pipes should he be using???

yes it is , its an old property on a farm

getting scottish power out to do a load test ,might need a 3 phase meter

yes qualified heating engineers fitted system , main fuse was 60A he upgraded to 80A lights used to dip slightly before but worse with the higher load

just had a 12 kw aztec electric boiler fitted today and when it kicks in the lights dim and when it cuts out lights get brighter again . do i need a bigger incoming supply/meter/fuseboard ??????

thanks for the replies do any of your stove's have problems with coal & logs rolling against the glass its a big problem with my hunter

ive got a hunter herald 14 at the moment with a ch boiler in it , totally useless for heating a house and its got a few design faults

im looking for a new stove , does anyone have a morso squirrel ?? are they any good

im having a few problems with my ch and im wanting to check plumber plumbed in in correctly , does anyone have a hunter stove with a wraparound boiler.

2 x 500 singles 5 x 1200 singles 1 x 800 double 1 x 1200 double

ive got a multifuel stove which has a water output of 13 kw ive got 9 radiators in the circuit and a hot water tank . after fire is lit and up to temperature the pipe that goes to the hot water tank gets hot and when the return to fire gets hot the radiator pump kicks in and within an hour all...

i also have a pressure reducing valve and i have it set at 4 bar and have no problems

im building an extension and am planning to install velux windows into the roof but im concerned about the air gap after i install the window , how will the air flow over this section of roof if the window is installed ?? any ideas anybody

im installing some new pipework in my bathroom can you get adapters from the old sixes to the new sizes my pipes are slightly smaller than 22mm and slightly smaller than 15mm

im planning to replasterboard my bathroom behind bath annd shower cubicle as previous owner did not beleive in grout and wall was all black , and im wanting to put insulation into the cavity do help with noise . do i need special plaster board for bathrooms???

ive a problem with high mains water pressure and have ordered a pressure reducing valve , but what pressure should i set it at ???

ive layed a few laminate floors before but my new living room has two large radiators on different walls. ive always started at the radiator previously to make life easier for myself but with two radiators , where do i start?????