Search results

  1. A

    Led Deck lighting issue

    Yeah it is a digital voltmeter I used, ok I will look into that thank you for that
  2. A

    Led Deck lighting issue

    Ok couldn't find a suitable lamp to test but I have done a simple voltage test, the transformer appears to be working fine giving a steady 12.39v, when I connect the controller unit with it turned on 12v is coming through to the 4 pin connector but if I turn them off 1 of the 4 shows no voltage...
  3. A

    Led Deck lighting issue

    The only way to get them to go completely off is to unplug the transformer... thank you I will try whatvyou suggested and see then pop the results back on here
  4. A

    Led Deck lighting issue

    Hi all quick question i hope someone may have more knowledge than I do on, fitted some led deck lights, only 7 which is powered by a plug in transformer to 12v dc then to the controller then the lights and I have just noticed that after switching them off ( via remote control ) they stay on...
  5. A

    Building regs and doors

    Hi Is there anyone on here that can tell me if building regs involvement is required to replace the French doors on my summerhouse/outbuilding? They are timber currently and nearing the end of their life and I wish to replace with upvc double glazing matched to the same colour as the doors are...
  6. A

    Archway lintel

    There is a small crack in the render which i measured and marked about 3 years ago which hasnt got bigger, its what got me interested in what type of support it had Its probably just your common render crack but it still concerns me a little
  7. A

    Archway lintel

    Its supposed to be a supporting wall and the direction of the floor joists above do go in the right direction to suggest it is, i can only deduce it has a brick form arch in there but i dont want to strip render off to find put just in case
  8. A

    Archway lintel

    Hi all Ok in my house i have a living room seperated from the dining room by an archway, it used to be a door but was opened up in the 80's by a builder friend to a wide arch... now i have had my reservations recently about wether or not it has a lintel, i have drilled small holes all the...
  9. A

    internal wall venting

    Occasionally on an airer if it wont go in a tumble dryer but nowhere near this room, ok passive vents it is then i will look into them
  10. A

    internal wall venting

    Would it need to be an extractor or just a simple louvre style vent to work
  11. A

    internal wall venting

    hi all ok i need a bit of advice regarding wall vents, i have a small room used for storage of various household bits n pieces it has no window or vent to the outside and when its cold outside for a period of a few days some of the items get what looks like white mould ( although im not sure it...
  12. A

    Room ventilation

    Ah ok, i never thought of a powered vent just the usual slotted vent, i am able to fit one to the outside would that be better pulling the stale air and dumping it outside or would that still require another vent on the partition wall to pull fresher air in? Cheers for the reply
  13. A

    Room ventilation

    Hi all Ok i have recently added some partition wall and a door in the corner of one room to create a tidy unseen storage room but it has a problem, it has no window so it doesnt have any ventilation and after a few months of it being finished it takes on a musty snell when it hasnt been used...
  14. A

    hot water cylinder relocation

    thanks for all replies, for some reason im not getting notifications on when you post. ok so if i add the strengthening into this cupboard then all should still be good with the head of water at the taps, thats good as im not touching the cwt. plumbing wise it should be fairly straight forward...
  15. A

    hot water cylinder relocation

    hi all ok i know there are a few threads relating to this subject but not quite the same setup as i will have so i need to ask a few people who can answer these questions for me 1. i am not sure i can get the clearance to fit the hwc into the loft with enough eaves space to get the cwt above...
  16. A

    wiring within insulation

    ok quick question as i have been reading up on some of the similar threads on here but nothing definitively answers my query i have just finished the outer shell of a summerhouse and now i am looking at the inside, it will have lighting and standard raing mains with only things like a tv and...
  17. A

    cast iron guttering replacement

    hi ok im looking at replacing my cast iron guttering as its extremely old leaks a hell of a lot and looks past it, i will be replacing it with plastic but to start with i have to get the cast stuff down and despite my best efforts i cannot find anywhere which says how much each section its...
  18. A

    floor span

    hi all ok can anyone tell me if 10" x 2" joists are strong enough to span 7.5m and support 1 maybe 2 people on a raised platform? i want to put a viewing platform over the top of my summerhouse so i can permenantly mount my telescope and be able to support me walking and resting/sitting on...
  19. A

    a room within a room

    hi all i am in need of a bit of help with a dilema that has had me scratching my head for quite a while now, i have various items ( mainly my wifes stuff ) books photos some ornament pieces which are metal and need to store them in the loft. the problem i have is in the summer it gets...
  20. A

    insulating loft

    hi thanks for the reply, if possible i would like to bring the average temp up there to more like a room rather than a loft..... my wife has far too many photos and books ( some signed ) which are getting affected by the heat in the summer and the cold in the winter even boxed. if insulating...
Back
Top