Search results for query: hotpoint bearings

Hi Folks The drum bearing for my Hotpoint Aquarius WT540 washing machine is on its way out, I have searched the usual online spares dealers even hotpoint site to see if there is a bearing kit available. but there doesn't seem to be a kit for this machine. Do I need to replace the drum and tub...

We have a Hotpoint WMYL8352PUK washing machine with bad drum bearings. The bearings don't seem to be listed anywhere... only the whole drum assembly. Is this one of the machines were it isn't possible to split the drum or am I just not looking hard enough?

This fell out of the rear of my 15 year old Hotpoint Aquarius WM23. Is it part of the bearing? What do I need to order to replace the bearing? Thanks

How do I replace the bearings on a hotpoint WMA30? The drive belt on my washing machine keeps slipping towards the drum so I think the bearings might have gone. I need to know how to replace the bearings and roughly how much this would cost? Will I need any special tools/how long will...

hi folks, ive got a hotpoint aquarius wma30, bearing has went dry through sitting for a period of time, the machine functions fine other than the unbearable noise from the bearing, are parts readily avaialable, if so who and where, and on a scale of one to ten how difficult is it and should i be...

I have a hotpoint few 12 the main bearing is actully sloping around in the outer drum housing and worn the resess to over size which is giving the afect of a worn bearing if that makes sense, is there a sleave or repair kit for this problem or is the machine nackerd??

Hi Folks! I have a Hotpoint WMAO963PUK washing machine and the bearings are on the way out... done a quick search for replacements but nothing conclusive... can anyone tell me if the bearings are replaceable and if so what I need to get in advance please? Cheers

Can someone please tell me if a bearing change on a Hotpoint WM63 is fairly easy(ish) and if so can it be done through the access hole (the back is welded on except for this hole), or do I have to remove the drum from the top? Any special tools needed?

The drum bearings on my Hotpoint FEW12P have gone. Hunting round the internet, I believe because I have a plastic drum pulley, that the bearings are the smaller 30mm type. This means I am quite likely to have to replace the spider and rear half of the drum as well as the bearings. This looks...

Hi Old Hotpoint WM22 started sounding loud on spin, and sounds a bit 'crusty ' when turning the drum manually. Time for a bearing change. This evening I stripped the machine down- front panel off, front of drum exposed, belt and pulley off. Now that the belt and pulley are off, the drum...

Hi i was looking at replacing the drum bearing on a hotpoint wt640 i have done a couple before on different models, having a look at the drum it appears to clip together. before i spend time on taking the drum out i thought i would check and see if it is easy enough to split the drum? thanks Al

Our trusty Hotpoint WNA31 washing machine is making very loud rumbling sounds during any fast spin ( Metal on Metal grinding noise ) I can move the drum up and down about 20 mm Looks like the bearings have gone ?? Is this something thats worth repairing ? The Machine is i suppose 7 years...

Anyone have any advice, guidance or a how to to replace the drum bearings on our Hotpoint WMA30. It's out of the 5 year parts warranty, i have obtained the rear drum section containing the bearings, and i'm going to start stripping down the washing machine tonight to replace it. I've never done...

Hi all great site you have here. I have a Hotpoint WML560P and its starting to get noisey, it sounds like bearings. Does anyone know what size bearings they are and where I can get them. I have searched ebay and all I can find is the spider only, or bearings that dont specify my machine. All I...

Hi, Could anyone please inform me how easy it is to change the main bearing on my Hotpoint WM63 washing machine, mainly I need to know if it is just the metal round plate at the back of the machine that has to come off or does the whole machine have to be taken to bits! Any tips would be...

Dear All The bearings on my Hotpoint WMD962 washer sound like they are on the way out. I was wondering if it is worth the effort doing the job or paying for a repair? Looking online you cannot buy just the bearings & have to replace the whole drum unit which looks like a big job and the part...

just fitted a new set of bearings to a Hotpoint WF840 cost me £18 and a few grazes the old ones were disintegrated and drum completely siezed :shock: :shock: was a mission but do-able from an amateur like myself and it works nicely too :shock: :D :shock: :D :shock: :D heres...

Hi, I am looking to purchase 2 bearings & seal for my Hotpoint Aquaris washing machine. The model is WMF760 I have supplied 3 photos as ive been told this machine is could be sealed but as you can see it has a ring of bolts around the drum. I have then been told that these have 30mm or 35mm...

Hello, I just replaced the bearings on my Hotpoint WF840 (what a bloomin' job that was) but before I put it back together, was wondering if I should grease the spindle, or will that affect the water-tightness of the seal? Thanks

I have a Hotpoint WF000, approximately 11 years old. Drum bearings are completely shot, its very noisy in operation, and some distinct wobble in the drum. (Mainly due to the dozy ex overloading it every wash I suspect....) Anyway, a local guy quoted me £120 to repair it, but now his colleague...