Search results

Wow, have a mate who works at Jeld Wen and asked him about mates rates, I thought they were quite good. I do know they have standard, medium and heavy weight constructions. Will keep looking else where.

Hi, Looking to buy up to 6 internal, 4 panel doors, thinking of the moulded type. I've seen cheap ones that you can press in the middle and feel them flex. Are there any makes / suppliers you would recommend for reasonable quality at a decent price.

Hi, Looking to buy up to 6 internal, 4 panel doors, thinking of the moulded type. I've seen cheap ones that you can press in the middle and feel them flex. Are there any makes / suppliers you would recommend for reasonable quality at a decent price.

Bounce ..... anymore suggestions?

Just to add, I do not have a combi boiler, as I understand some of the manufacturers do not recommend certain types of water treatment. I do have a Saunier Duval System boiler that is sealed, but, obviously does fill from the cold water feed to the house. The CH system has Sentinal X100 in it.

Hi, I live in Leicestershire in a very hard water area. All the taps, shower heads, shower screen, Toilet pans, kettle etc etc are showing signs of deposit build up after only a few years in new build house. What can I do to reduce, or stop, this? And moving house is not the answer I'm...

done some research ... Sentinal X100 it is. Thanks

Hi, I have : Saunier Duval Enviro Plus F28 System boiler Range Tribune HE Non vented hot water cylinder Plastic push fit plumbing for majority of CH pipe runs Normal radiators on copper tails between the radiators and plastic piping TRV's on the radiators All fitted in new build house...

Cheers NP7 sorted.

Appreciate your assistance and comments. I appreciate someone coming out will want paying .... I would if that was my job. And in fairness, £85 for a home visit is about what I'd expect. But, as a customer, I want to feel like I'm getting value for money. My comment on being "mugged", is...

Getting there, sorted battery locally for £9.49 incl VAT, Yuasa branded etc The alarm company wanted £31.20 for the same battery. BUT, by trying to fit it, remove old one, touch anything, it triggers the K01 Tamper and locks the unit. Only way is for an engineer to come out and reset with the...

Hi, Wonder if you can help me. My alarm battery is 5 1/2yr old and now failing. It is a Yuasa Y7-12 12v, 7ah, C20 - but, can not get one for a few days. I can buy a Yuasa NP7-12 7ah today from local stockist this morning. On paper they look the same, and the dimensions are the same...

OK, think I may have found the engineers code on the manufacturers web site. Will this just be a case of entering the code .... or, will there be other codes etc required to reset the system after a battery swap?

If I sort a battery and fit it, is there an engineer code or similar that I can enter to re-set the system?

Hi, I have a Scantronic 9651 which was fitted in a new build about 5 1/2 year ago. Tonight the control panel started to beep and the readout says "Unit Low Batt". I enter my code, enter 1 and review the fault. This stops the panel beeping, but, approx 10 mins later, the beeping starts...

Thanks for the offer, but, postage etc will kill it. Looked at the chrome plastic snaps (sheaths) and may look to use this if it works out easier. Screwfix do a kit, 2 lengths of 300mm x 15mm chrome copper and 2 tube collars for £5.49. This is the way I'm thinking of going...

This is the way I'm thinking. But, will lay it out and see what's the best "look". Thanks for all the replies.

I'm fully tiling a wall in my bathroom that has a window that is off center of the wall. Do I use the center line of the window and work outwards, so that the cuts around the window are even, but, cuts will be odd at the far edges of the wall? Or .... Do I work from the center line of...

I'm installing a chrome towel rad in the bathroom, and would like to use chrome plated flow and return pipes. Where I tee off the main flow and return for feeds to the towel rad, can I use solder tee's, or, should I use conex type fittings? If I can use solder fittings, do I have to use...

Thought of these, but, all the pipe work is push fit plastic's, and I thought that clip on thermometer's would not work plastic pipes. Hence, my idea of using an IR type thermometer to measure the temp of the radiator valve / corner of radiator.