Search results

Guys I need a bit of assistance please. I have a zone that every few weeks triggers the alarm and I want to try setting double knock on it. I thought that I had done this correctly but opening a window on this zone still triggers a full alarm. I thought that I would need to open and close...

Guys I need to replace the drive coupling (sleeve) on the above pump but cannot locate a supplier. I would appreciate a lead to where I can get one. BTW I'm near Abergavenny Many thanks in anticipation<G> Cheers Richard

Guys about four years ago I installed a Scantronics 965 hard wired system in my rural office premises and in all that time have only had one instance of it having been triggered. According to the log this was due to the vibration alarm on the large glass doors having been triggered at about...

Guys I'm having mainly rain problems triggering this combined Screwfix supplied lamp and PIR unit http://tinyurl.com/naa6gm5 This unit is fitted under the eves of a building and faces south. I have the PIR masked down to a limited area and have tried to make it less sensitive to being...

I want to install a Scantronics communicator 8400 in my Scantronics 9651 alarm box and have just downloaded the manual. It talks about programming the chip, however surely when one buys a new unit it should not be necessary or have I simply not grasped something? I want to connect the unit to...

Guys I am needing some assistance please! I want to add a couple of additional users to the system but cannot for the life of me work out how to do this. I think I have to enter the master user which is fine, and that after putting in the master code I follow this with 4. I'm then...

I put in all the security wiring under the plaster along with the feeds for the cameras but totally forgot to bring an Ethernet or phone connection to where the scantronics 9651 is installed. Now I am thinking of adding a communicator but have no means of connecting to the outside world apart...

I've installed a Scantronics 9651 alarm system and the other day the power to the building failed for several hours. I was in the building at the time (business premises) and wanted to set the alarm when I left but the normal method failed. After a lot of faffing about I managed to set it...

Thermacon CH oil boiler fitted with ecoflam pressure jet unit with Danfoss BFP 11 R3 oil pump. It was working fine until a couple of days ago when it failed to complete the start-up sequence. I lifted the cover that protects the fan and electrodes and found that the fan shaft was hard to...

Guys I'm hoping that someone here can again help me out. I've got CCTV all set up and other systems too, but I would like to find some method of knowing if anyone has violated a particular exterior security area. What I had in mind was taking a feed from a PIR that would have been triggered...

Guys I want to install a very powerful blue strobe wired into the alarm system and wonder if there is something out there that might suit my needs. Whilst it is great that when the alarm triggers the din from my two Masterblasters will be considerable, however I think it would be useful to...

Guys, as an additional deterrent to my alarm system I've got a 500w security light with inbuilt PIR looking directly at a very small area a step away from a pair of patio doors being the most likely danger point on the premises. It's also where one of the CCTV cameras is looking at. The light...

Guys my apologies for raising this again. I want to add another Masterblaster type siren but installed inside the premises to give any intruder a double dose of extreme noise!! I know that I will have to run it off a 12volt relay to switch the 240v but please can someone gently take me...

Guys I think I had a result the other night! At just before 2.00am... well according to the alarm log it was 1.41 I was woken by the Master Blaster siren going off in my work place some 100yds from my house. By the time I had got up there there was no sign of anyone and I turned off the...

I have a remote property that I've fully alarmed but I now am turning my attention to exterior PIR floodlighting. When particular lights are triggered I want them also to trigger an alarm bell/sounder for two reasons. 1. To let me know that someone is where they should not be. 2. To...

I want a reasonably priced PIR that I can use in conjunction with my Scantronics 9651 box and is suitable for looking at an external wall area of about 10m length which has two vulnerable windows. These windows are alarmed but I want the alarm system to trigger when someone intrudes into this...

Guys this is driving me nuts! I've changed the access codes from 4 to 6 digits and the master user to a new number. Now I want to set up a new user (me) and then assign it to work with a proximity tag but am hitting a brick wall. I've read the User Manual and the Installation and Programming...

I've installed a FSL system using a Scantronics control box with a Texecom Odyssey alarm box on a four wire cable with the siren and strobe connected together. I've now added a Materblaster siren next to the alarm box to up the noise level (we are very remote here) and would appreciate advise...