Search results

We'd like to build a 1m tall fence in our front garden. But part of the garden runs along-side our neighbour's mono-block driveway. I've previously planted border plants on that bit, and I know that the developers (new build estate) have put quite a lot of concrete under the grass which seems to...

We have one of these alarms fitted in our house (new build), but the zones are set up wrong and we don't have the engineer code. Alarm company are refusing to help without taking out an expensive subscription. Is it worth trying to reset the whole system to factory settings and setting it up...

We have a Honeywell Galaxy G2-20 alarm fitted. The main control box is in our garage. We've recently converted the garage and would like to fit a new door sensor to the PVC door. Is this a job I can DIY, or do we need to call someone in?

I'm trying to bleed a radiator, but the air is trickling out far too slowly, so maybe I need to add pressure to the system? The system is 2 years old, in a new-build house. I used to have a combi boiler with two taps underneath, very easy to add pressure - but I don't know how to do it with...

We have a boiler in the garage with a hot water storage tank in an upstairs cupboard. New build house, so the system is only 2 years old and has never been bled before. A couple of our radiators weren't heating up properly so I bled all the radiators in the house (let them get hot, turned...

Does anyone know how much time/money we should expect to pay for labour for installing a new radiator? It's in a converted garage in a new-build house. Through the wall from the hallway which has a radiator already. The radiators use plastic/flexible pipes which feed into the wall. I've only...

Does anyone know approx. how much we should pay for bricking up a 7x7 integral garage door with two glass side panels and a central PVC door? Near Glasgow if it makes a difference.

The edge of our concrete garage floor where it exits the garage has a 15cm sloped section, to help water run away from the door. We're replacing the door with a PVC French door and I need to straighten up the sloped bit. My only concrete experience is pouring it into a hole to support the...

We're replacing our garage door with French doors (two side panels, two doors). This is our current setup: The frame of the garage door is fixed to the inside garage walls. We want the French doors to fit closer to the front of the house, not deep set like the garage door. So in this case...

I'm replacing our garage door with UPVC French doors. The bit under the doors is concrete (the edge of the garage floor) and has a slope to let water run away to a drainage channel in the driveway. So it slopes down away from the garage. The slope is only about 15cm wide, but this is the exact...

I'm building a 2.6m stud wall with a door. Is it enough to fix the top plate with one fixing at each end and one in the middle? So they'll be about 120cm apart. I might put shelves up on the wall so it will need to take some weight, but nothing massive.

I need to build a stud wall in our garage. The ceiling joists run parallel to the planned wall, and the wall will be right in the middle between two joists. The only noggins I can find in the ceiling are one at either end, right next to the garage walls (which are 2.6m apart). There are none in...

I'm planning to replace my garage door with UPVC French doors (two doors, two side panels). I've never fitted doors/windows before but it seems fairly simple... Bolt into the walls and lots of sealant. Is it as simple as it looks or would I be better getting a second pair of hands to help... Or...

I'm planning to install uPVC French doors on a utility room where I'll keep my dogs. Similar size/shape to this: I'd like to make the doors as secure as possible, but not sure how to achieve that. I think the locks are upgradable, but is there anything I can do about the glass? I can't find...

We have an integral garage, and would like to: 1) Replace garage door with uPVC French Doors 2) Fit a stud wall (with door) in the middle, so the rear area can be storage and the front area can be somewhere to put the dogs For security, we would fit blinds/curtains and paint the walls/floor so...

I have an integral garage which I'd eventually like to convert, but for the time-being I just want to knock-through a new external door, and split the garage into two. The rear of the garage will be used as a utility room (with only external access) and the front with the garage door will remain...

I want to put up some lightweight venetian blinds on the inside of a window frame. I drilled through the top to insert a plasterboard fitting but found out that it's dot-and-dab onto the metal lintel. I have tried a few different plasterboard fittings but they're all too long. It seems like...

We have an integral garage with a block wall separating the garage from the house. How much should we expect to pay for cutting a doorway and fitting a door? I've had a range of quotes (over the phone) from £200 to £2,000. We're going to get people over to give a more accurate quote, but what...

We have been lucky with our new build, only really minor snags and the builder has been mostly helpful... But this is an issue we can't resolve. Our upstairs hall (and to a lesser extent the bedrooms) are excessively noisy. The house is around 2 years old, but it has been like this since 6...

We have been lucky with our new build, only really minor snags and the builder has been mostly helpful... But this is an issue we can't resolve. Our upstairs hall (and to a lesser extent the bedrooms) are excessively noisy. The house is around 2 years old, but it has been like this since 6...