Search results

Hi CBW. The pump is fairly new and is on setting 3 on constant. Is a Grundfos with 3 different modes for different system types. It’s on the standard setting on speed 3. The A feed on the value is absolutely baking. Cheers.

Thank you for the help folks. I didn’t realise anyone had replied as normally I get notifications but didn’t in this instance. I’ve restricted the lower gate value to restrict into the tank. I’m assuming the one on the left needs to be open just a tad for enough water to trickle through. The...

Hi. Would anyone be able to assist me please. We are struggling to get the heating to the rads downstairs. They are warm but barely and some cold. When we had a plumber over a couple of years back he adjusted 1 or both of the red turn valves as pictured. Is anyone able to tell me which one is...

Hi there. understandably the weather has been bloody awful the last few days but am quite worried about water ingress we have on one of our chimney walls. We are currently renovating one of the upstairs rooms and typically have literally just finished painting ready for a new cast iron...

Hi there. just a quick bit of advice needed please. Our house is around 1930s and are getting each room plastered one by one. The other rooms have been fairly well covered in plaint but also had been wallpapered. This room we are currently doing has just had thick old paint on the walls at...

Can anyone recommend a decent clear fence treatment for my new Pickett fence. I like the rustic feel of the natural wood and just want something to protect it without changing the colour too much. Don’t mind if it changes slightly. Also don’t want to spend the earth as I am aware that some...

Thanks for the help. Mike.

The only change maybe a socket or 2 outside from the shed for outdoor lighting in the garden. Other than that it's not going to change a great deal.

In our house we moved into a couple of years ago we have a 13amp fcu off a ring supplying power to the shed. The shed is around 15 metres away and it's currently on a 2.5 swa with a small consumer unit in the shed. The shed is barely used and has a few lights and one socket. The socket only...

Would it be ok to connect 2 1/2 flexible hoses with a Hexagonal nipple like in the picture. Thanks.

Cheers Andy. Thought as much.

We are getting a grey loud humming and vibrating noise when we turn hot water taps in in the house. From looking at the Cold water tank in the loft it seems to do this when the cold water tank is refilling. It's the cold water feed all around the house which vibrates. Only started when the...

We had a lovely porcalain peteo laid in the summer with dark anthercite slabs. Unfortunately 2 laid were chipped so I got the guy back and he fitted 2 more which I went and collected. After being laid it was evident that the 2 replacements are much lighter and stand out like a sore thumb. We...

stat is not in that room no. pipes are 15mm Thanks

yes it is a wood burner and rads are gas. we will use the log burner every so often but dont want to reply on it for heating the room.

I do apologise. The walls are solid brick and plastered, with the ceiling 2.6m. 2 walls to the oustide. Unfortuanatly we dont know how the old rad suited as the valves were seized shut and it had to go ready for the plastering etc. Thanks. Mike.

I am just finishing a room in which everything has been stripped back to nothing. The VERY old single panel radiator has gone and i'm wanting to know what size to get for the replacement. The old one was very large, I believe 600x1800, without going and measuring. The room has a large bay...

Just for backup to be fair.

Yes is running 2.5 off a 16amp MCB. So I'll just replace the 2 switches and probably fit a new piece of immersion cable to be sure. Thanks for the help. Much appreciated. Mike.

Yes it's running off a 16amp fuse. So would you just fit 2 DP switches in the current switch locations because I don't think the existing cable to the first switch will be long enough to pull through to the consumer unit. Out of interest what size cable should be running for an immersion...