Search results

  1. S

    Sockets not working after removing dead end

    It was the extractor connection ;) thanks for the help though @terryplumb its much appreciated.
  2. S

    Sockets not working after removing dead end

    @terryplumb I may have worked it out and if so call it user error, i completely forgot I disconnected the power supply for the extractor which does have a return so Im going to re-wire after tea ;)
  3. S

    Sockets not working after removing dead end

    Thanks for the reply, The lighting circuit is fine all works well on that front, I'm sure they are both part of the same circuit as isolating the MCB for sockets isolated both the fused spur and the power socket. If i Put them both through the same junction box would this resolve the issue ...
  4. S

    Sockets not working after removing dead end

    Hi All, I'm currently gutting and replacing my kitchen which includes plastering, flooring, electrics everything. I do have an electrician coming to re-wire the kitchen properly for me but in the mean time I have had to remove some as a wall is to be cut out and bi-folding doors installed. I...
  5. S

    Dishwasher Door

    Bugger might have to find a contact number for Electrolux.
  6. S

    Dishwasher Door

    Sorry if this is in the wrong section folks, So I have just installed a new kitchen at home and it looks great but I appear to have mislaid the door fixing kit for the integrated dishwasher along with the instructions. I can't seem to find one online to purchase either so wonder if anyone has...
  7. S

    Kitchen Worktop Cutting

    Thanks for the replies everyone it's a composite sink but at 8:30 this morning the joiner arrive at the door unexpected :-)
  8. S

    Kitchen Worktop Cutting

    Hi Everyone, i wonder if you could help me please, I have had a joiner mitre some new 50mm worktops for my kitchen as well as cutting the holes for the hob and sink. Everything has been fine until I tried to fit the sink today and it doesn't sit flat all round after further investigation it...
  9. S

    Fireplace Lintel

    Just a quick question please folks, I need to open my chimney breast to accommodate a new cast iron fireplace so I removed the old ornamental one and had a sneaky peak inside but can't see any sign of a lintel, are the lintels normally one bricks width or should I still see it from inside the...
  10. S

    Laminate Question

    Thanks for that but the 2 walls in question dont have any skirts where the doors are sorry should have made that clear.
  11. S

    Laminate Question

    Hi Guys, I am going to be fitting a new Wickes kitchen at home soon and the missus wants laminate flooring putting down as well. My question is as I will not be going wall to wall because a large section will be covered by floor units do I still have to leave an expansion gap all the way...
  12. S

    Ariston Clas HE Boiler Fault

    One more question if you don't mind, I have read that there is a strong possibility that it could be the pump that is blowing the fuse which does kind of make sense as the boiler comes on when a new fuse is in but blows when put under any load, is there a way of disconnecting the pump just to...
  13. S

    Ariston Clas HE Boiler Fault

    Hi Guys, I have a problem with my boiler for some unknown reason the 3amp plug fuse blew last night and all I had was a 13amp, I put it into the plug with the intention of getting more fuses today. About 11 o'clock last night the power tripped and after some investigation today the internal...
  14. S

    Ariston Clas HE 30 Boiler

    Well its all working fine now, took it all apart again today and put it back together and its working fine all except the pressure relief valve which is leaking slightly, I have ordered one today but due to bank holiday weekend wont be here till wednesday, already have a MagnaClean fitted and I...
  15. S

    Ariston Clas HE 30 Boiler

    Good Morning Everyone, I have a question for you please if you could help, as in the title I have an Ariston Clas HE 30 Condesing Boiler we have had it for around 7 years or so now. We seem to have an issue with secondary heat exchangers in it as its on number 3 now, the last time the plumber...
  16. S

    Insulating Roof Rafters

    Hi Everyone, Did a conversion on the loft a few years ago and it looks really good, I left all the beams exposed and cleaned them up, insulated with that shiny bubble wrap stuff then plastered between the rafters. Now my 2 girls are getting older they want to go up there but don't like the...
  17. S

    Fire Rated Lights

    Surley the casing that surrounds the lamp stays cooler than an exposed lamp does.
  18. S

    Fire Rated Lights

    Yes the void is insulated, i thought a low voltage LED lamp would run at a cooler heat and be better as they are mounted in the floor.
  19. S

    Fire Rated Lights

    Hi Everyone, Not been on here for a long time but have a simple question for you, My loft is all floorboarded and plastered etc but has standard halogen downlights in the floor approx 10 of them, I dont like using them as I dont trust them but the effect is superb. Can i swap out the...
  20. S

    Central Heating Filters

    Cheers guys i will see what my local stockists have in for me tomorrow. :)
Back
Top