Search results

  1. T

    Isar HE30 bangs when hot water is turned on

    i used to work as an engineer for ideal boilers, you can fit the grey honeywell diverter valve to the old cp hydroblock but you need to change the complete left hand hydroblock, we used to change loads and loads at ideal!! they were ****e. if you contact ideal they will come and do the job for...
  2. T

    Worcester 24i poss. PCB gone!

    he said the reset switch was down, i take it he means the thermal reset switch on top of the boiler, 24i boards fail quite a bit mate, i have changed loads. amd if the overheat stat has tripped, then it has for a reason.
  3. T

    Thought Wochester were reliable

    ring worcester bosch they will come out for a one off charge of 210, and replaced whatever is needed, i work as an engineer for worcester bosch and sometimes we practically rebuild boiler for 210, even when the parts cost over 500!! what boiler do you have and what part is required. like others...
  4. T

    Worcester 24i poss. PCB gone!

    sounds like its the board mate, i work for worcester bosch as an engineer, and i change a few of them. the part number is 87161463000, they are between 90-110 quid i think mate. the spark generator on the board might have gone. good luck
  5. T

    Replaced heat-exchanger, mixer shower hot... then not?

    isolate the cold mains to the combi boiler, then open the hot taps, if water still runs then you have crossflow. the cartridge is passing and is faulty. i for for worcester bosch as an engineer and see this quite often as most plumbers dont fit non return valves on shower mixing valves and when...
  6. T

    Ideal Response Boiler losing Pressure

    the vessel has gone mate, the vessels on the response like most of the response were crap, you can call ideal and they will come out on a one off call out charge of about 200quid and change it, and the pressure relief valve, plus whatever is needed. i used to work for them as an engineer now i...
  7. T

    faulty ideal isar

    yeah we do make hard work for ourselves dont we!! lol. :lol:
  8. T

    Ideal Classic RS40

    i will look and see if i have one on my works laptop and will email it to my home email address then copy it and put it on here if i figure it out, failing that, call our office at ideal boilers, and we might be able to send you one. i will get back to you. i know that i have a hard copy in my...
  9. T

    faulty ideal isar

    yeah mate, they used a slightly smaller flue manifold gasket for a period, this caused a few leakers, now all come with the thicker flue manifold gasket, i used to hate changing them as you could never get the flue to lift up far enough to get the manifold out! least with the old m30100 the aav...
  10. T

    faulty ideal isar

    i would also advise you to call ideal, boiler out of warranty call, 170 quid. we will come out and replace all parts that need replacing to get it going. i have seen the aav leak and take out the boards, its rare, and usually if the customer runs the boiler with no water in it!! why we never...
  11. T

    Warmsure

    not really, how would you feel if you had the knowledge and experience of years on boilers working for a manufacturer and someone called you a halfwit!!! most people would be glad to talk to an engineer from a manufacturer, its clear that some dont want the help or advice, i do have better...
  12. T

    Ideal in loop!

    thanks mate, i dont mean to be off, but i want to help you guys, hell i can even learn from you guys, we as a company can learn from your comments and frustrations. if you tell me something thats upset you about the call centre or boilers, i will help all i can, if theres any part numbers you...
  13. T

    Ideal ICOS Condensing Boiler - Hot Water/No Heating?

    first of all, hello. im from ideal as an engineer. have you tried resetting the boiler? there is a reset in the middle of the user controls. then if its been reset and still going to lockout then check that theres is gas to the house, ie. check gas hob or other appliance works. then if when the...
  14. T

    Ideal in loop!

    my apologies, but this guy jus intent onwinding me up, in other post aswell, i try to help on here but all i get is slagged off or called a halfwit! i actually thought you may want guys from manufacturers on here for assistance, i dont have to post on here, my company is already against it, but...
  15. T

    Warmsure

    erm... not really as bg had put hot and cold wrong way round on the boiler and couldnt get very hot water, so before throwing the insults, and reducing yourself to pathetic comments GET the FULL facts, so it seems you are the half wit, with only half a story, i often wonder why i bother posting...
  16. T

    Warmsure

    no my ****ing dad did not get me the jod, i have worked at ideal boilers as an engineer for years, which i got on my own right and i went to a brand new isar installation yesterday fitted by bg, which surprisingly enough was an isar HE30, so that pretty much destroys your therory!
  17. T

    Ideal in loop!

    no **** sherlock, do you want a medal for figuring out that biasi made the c class, and the mini range!! i8 think you will find nearly all boilers are the same, just the arrangment of the fittings inside alter thats all!
  18. T

    Warmsure

    his surname is NORTH and he runs things up here in yorkshire!!! oh and my mistake was the sucess rate was 97% and failure rate of 3%, sorry for the typing error!
  19. T

    Warmsure

    yeah right whatever mate!!!! i noticed you said that when they first came out....6years ago you tit a lot has changed since them mate, we now have the HE range which is a better boiler!
  20. T

    IDEAL ICOS M3080 FLAME ERROR

    i believe thats what i said, check the trap, or sump etc.. lack of servicing can cause this to build up and block the trap. its doubtful to be the gas valve, if the boiler ignites then shuts off on LF. then its the probe or lead as its lost detection while burning, if its jus LF not LF. then its...
Back
Top