Search results

  1. R

    Kitchen electrics question

    Circuit 7 is the outside sockets. If the kitchen is on fire, switching the extractor/hood off is going to be low down on my list of things to do....
  2. R

    Kitchen electrics question

    Thanks for the replies but jeez, calm down guys! When we got the house it had a old brown fuse box; part of the surveyors notes was this needed replacing, got an electrician in and this is what was installed: The extractor/cooker hood is going to be ducted outside - do these hoods often...
  3. R

    Kitchen electrics question

    Hi Guys, Just been enquiring about a new kitchen and wanted to check on some info to make sure I'm not about to be ripped off... Electrician from fitters came round and made two points: a) Kitchen extractor unit will need an isolator switch fitting b) Our CU is about 7 years old...
  4. R

    Attaching fixings to shower/wetwall

    It's genuine wetwall: "Wetwall panels are constructed of Medite Exterior Grade MDF, covered on the face with high pressure laminate and balancing laminate to the back of the panel." I don't want to damage the outward facing laminate surface and end up with the possibility of water getting...
  5. R

    Attaching fixings to shower/wetwall

    Hi, We have had wetwall installed installed in our shower cubicle and now want to put up a couple of shower baskets. I've got marine grade stainless woodscrews to replace the ones that came with the baskets but is there anything special I need to do so I don't damage the finish and...
  6. R

    Combi microwave bulb

    The bulb has gone in our old Toshiba combi microwave - I can find E17 20W bulbs that are designed for microwaves but with it being a combi does it need to be heatproof as well? TIA Rob.
  7. R

    LG 1402FDS Error code AE

    Had a look and everything looks ok inside. Have ordered a tubular heater and will connect it up in conjunction with an adjustable froststat so shouldn't cost the earth to run (only 120W anyway, but didn't want it on 24/7/365)
  8. R

    LG 1402FDS Error code AE

    I'm an electronics service engineer by trade so normally I would have been straight in there but I've drawn the short straw this year and have been on call so haven't really had time to get inside and the wife wants to do the holiday washing :wink: but good news anyway, I tried it on a quick...
  9. R

    LG 1402FDS Error code AE

    :D Thanks for that, just got home from work and have tipped it forward on a couple of wood blocks and have got quite a puddle out of it - will leave it for a couple of hours to drain and then try again - the flexible hose had bust at the top near where it joins onto the valve on the copper...
  10. R

    LG 1402FDS Error code AE

    LG 1402FDS Washer Hi, Came back off holiday to find washer cw supply hose had split due to the cold weather so garage was rather soggy - have fitted a new hose and now the washer shows error code 'AE' which according the instruction manual has the following fix: Symptom - Water Leak, Action...
  11. R

    Anbody a expert on Rhinofloor?

    To be honest there isn't that much difference in prices we have been quoted - the acoustic stuff is less than £3 a square meter more than the standard stuff and we are only talking about 6 square meters :wink:
  12. R

    Anbody a expert on Rhinofloor?

    Here's the response I had from Armstrong: 34008 Popular Choice Golds, has a overall gauge of 2.5mm with a wear layer of 0.2mm - Wear Warranty of 7 years 39097 Acoustic, has an overall gauge of 3mm with a wear layer of 0.35mm - Acoustic rating of 21db - Wear Warranty of 15 years Both...
  13. R

    Anbody a expert on Rhinofloor?

    Could someone explain what the difference in these two products is? (I know they are from different product lines but can't seem to find a comparison anywhere). I assume the Acoustic is a slightly better product as it has a longer guarantee but is it called Acoustic for some random reason or is...
  14. R

    Fixing channelling in wall

    What's the preferred method of fixing galvanised steel channelling in the wall prior to re-plastering? TIA Rob.
  15. R

    How long before tiling

    Cheers guys. :)
  16. R

    How long before tiling

    How long do you have to let a plaster skim dry before you can safely tile on it? Cheers, Rob.
  17. R

    Zanussi WJS1397W Hot water and program

    Looking from the back, the cold is on the RHS and hot on the LHS.
  18. R

    ZANUSSI WASHING MACHINE ...No fast spin ? Please Help

    Can't really help with your problem, but I think that's a picture of the timer/programmer module, the pcb that controls the motor looks like the first two pictures on this thread and on our m/c was located at the back in the bottom right hand side (I know it's not exactly the same model but...
  19. R

    Shower pump - need replacement advice

    Our shower pump has decided to give up the ghost and spring a leak - the hot water cylinder is in the airing cupboard at gnd level and the pump is in the loft (in a bungalow)) I assume this makes the pump a -ve head type pump? What difference does a twin or single impeller make? The duff...
  20. R

    Zanussi WJS1397W washer-drier motor maybe kaput

    If it made a crackling sound make sure it isn't this sort of problem! I'm sure everyone will have their favourite or cheapest place, but here is somewhere you could get the brushes from: apart4u.com I had checked the brushes when I was fault finding my machine and as long as you are...
Back
Top