hive 2 wiring advice reciever installation

Need a bit of guidance here, ex sparkie so not a numpty, well not always :) Bought a Hive Active Heating 2 CH Only setup. So I have a dreaded ferolli boiler with universal clock as shown in Image1 Powered by a Switched Spur as shown in Image2. The Grey Cable is the 24v out from the boiler to...

Boiler: Greenstar 30CDI Hello, First post on here and hopeful of some assistance with my new Hive thermostat and controller. Pics included hopefully. I have a Greenstar 30 CDI conventional boiler. I have removed the room thermostat and previous programmer. There were only 4 wires going to...

Hi, I have purchased a new hive system which I want to install into our house, however as our current central heating system does not have a thermostat, I am going to need to wire in the hive receiver from scratch. I have gone through the boiler manual and have found the external accessories...

Hi, I am trying to replace my TP500 with Hive 2 however the wiring does not seem to line up. I have no permanent neutral or heating off wire. Both of which are indicated as required in the Hive installation guide. Here is my wiring behind the battery TP500 Here is the Hive install image...

Hi i want to Install a Hive 2 Thermostat. It is the Single Channel Receiver and the boiler Is an Ariston EVO combi. I currently have no thermostat fitted and use only the timer on the boiler to control on/off times. The Boiler is wired from a 3amp spur that runs behind tiles etc. I'll upload...