plumbing and heating

Moved into this new house in Dec 2016 , house was built in 2008 - and I notice that although every heating controls (time clock, zone valves, boiler, pump) says protect with DP switch fitted with 3a fuse that the only thing that is protecting the circuit is a SP 10a MCB in the consumer unit...

Hey Everyone, I have a 2 bedroom home (2 floors). The length of the home is 10metres by 6meteres width. Unfortunately, I was duped by a cowboy builder who installed a combi boiler (in the kitchen) and did a full central heating system installation in my home, after a few months the tradesmen...

Can anyone advise what type of elbow this is and whether it is suitable for a 25mm mains water supply? A plumber visited recently and said it's not the type of fitting he would have used (but I'd probably get away with it). Is there a better one? Thanks

Hey, New to the forum! Our heating and hot water is working absolutely perfectly but for some reason, when the heating reaches temperature and the boiler 'switches off', there is a quick but very loud gurgling noise from the immersion tank in our airing cupboard. Any ideas?!

Hey guys, Having issues with a worcester 28i junior combi. Heating is fine but when the hot water is in use it stays hot for around 30 seconds to a minute than runs cold. The boiler does not lock out. If the taps is then closed and re opens the same process happens. Hot for a short while than...

Hey guys, Having issues with a worcester 28i junior combi. Heating is fine but when the hot water is in use it stays hot for around 30 seconds to a minute than runs cold. The boiler does not lock out. If the taps is then closed and re opens the same process happens. Hot for a short while than...

Hi all im having to create this thread again as i am still having a problem trying to wire up this thermostat. My boiler is a biasi m90e24s and with the instructions that came with the unit for wiring 230v its not working. having seen the threads on here its not clear how it should be done, can...

Please can anybody help me! I've had a new worcester bosch combi 28cdi fitted, new radiators downstairs (one of which used to get hot but doesn't now). Honeywell thermostat, magnaclean. Downstairs radiators are stone cold - not even hot pipes to the rads. No air in the radiators - all bled...

Hi, I'm currently on the L3 gas utilisation course at lomax and I'm required to do 250 hours of work experience to get my gas tickets. I'm looking to help a gas engineer one day a week on a saturday. I'm not looking for any pay, just a good tutor to help me on my way. I spent last year at Tyne...