plumbing and heating

  1. L

    Vaillant ecoTEC plus 831 heating not staying onthe temperatu

    hi, we have an ecoTEC plus 831 and we’ve had issues with the heating staying on. When we came back from holiday the water pressure was low and I fixed this. The digital radio thermostat (Salus model RT300RF) was also out of batteries and we replaced these. No settings were changed. The heating...
  2. T

    Help Wiring Hive Receiver

    Hi All, We're in an absolute mess. Recently we've had a plumber come out to fix our heating and hot water. Both had stopped working. The first time he came, he changed a pump. This fixed the hot water - but the heating wasn't working. About a month later, he installed two new valves (Drayton &...
  3. M

    Help with Sizing a Tank Water Heater

    Hi, We are trying to size a water heater with tank for a dormitory toilets, laundry and public showers. Kindly let me know what will be the best way to get about doing this? Following are the equipment that will be utilizing the water heaters, Area Equipment QTY Bar Kitchen Single Tap Sink 1...
  4. A

    No hot water or any upstairs water pressure

    Hi i am really hoping someone can advise. Came home tonight on the hottest day of the year to find that we have no hot water at all and no water pressure upstairs. The cold kitchen sink tap is working fine but no hot water in kitchen, upstairs the hot taps don't work and the sink and bath cold...
  5. T

    How to put leak sealant in via Magna Clean?

    A plumber fitted a Magna Clean for us recently and we now want to put leak sealant through the system (rather than fork out hundreds to pull all of our floors up to find a leak we have). Can anyone explain the process to us? I.e. do we need to drain water out before putting the leak sealant in...
  6. Chris J

    Thermal store + wood-burner (HELP)

    Morning Guys, I'm looking to install a word-burner / central heating with thermal store as our only heating system (don't have any other cost effected options). Finding it very hard going getting reliable info on such a system, just wondering if anyone has been down this road and could share...
  7. M

    Full new central heating/hot and cold pipe replacements etc..

    Hi All I recently just had a full new central heating system installed, all pipes have been replaced and new hot and cold pipes have been replaced to cater to my new home extention and home. I also have a combi boiler. I paid British gas £8795 for the job. This was yesterday. However today I...
  8. P

    Hot water/mixer tap/worcester boiler

    I live in rented accommodation. The housing association have put in a new bathroom and recently a new boiler. I have a mixer tap with shower head on the bath which I use for a shower rather than filling the bath. Since the new boiler was fitted the mixer for the shower kept cutting out the hot...
  9. andyr123

    would you trust a 10amp MCB on a 3a central Heating Circuit

    Moved into this new house in Dec 2016 , house was built in 2008 - and I notice that although every heating controls (time clock, zone valves, boiler, pump) says protect with DP switch fitted with 3a fuse that the only thing that is protecting the circuit is a SP 10a MCB in the consumer unit...
  10. M

    (New Central Heating System Installation) How much should it cost for my requirements

    Hey Everyone, I have a 2 bedroom home (2 floors). The length of the home is 10metres by 6meteres width. Unfortunately, I was duped by a cowboy builder who installed a combi boiler (in the kitchen) and did a full central heating system installation in my home, after a few months the tradesmen...
  11. S

    Correct fitting for mains water supply

    Can anyone advise what type of elbow this is and whether it is suitable for a 25mm mains water supply? A plumber visited recently and said it's not the type of fitting he would have used (but I'd probably get away with it). Is there a better one? Thanks
  12. Musicmancjay

    Gurgling Immersion

    Hey, New to the forum! Our heating and hot water is working absolutely perfectly but for some reason, when the heating reaches temperature and the boiler 'switches off', there is a quick but very loud gurgling noise from the immersion tank in our airing cupboard. Any ideas?!
  13. F

    worcester greenstar 28i junior hot water issues

    Hey guys, Having issues with a worcester 28i junior combi. Heating is fine but when the hot water is in use it stays hot for around 30 seconds to a minute than runs cold. The boiler does not lock out. If the taps is then closed and re opens the same process happens. Hot for a short while than...
  14. F

    worcester greenstar 28i hot water issues

    Hey guys, Having issues with a worcester 28i junior combi. Heating is fine but when the hot water is in use it stays hot for around 30 seconds to a minute than runs cold. The boiler does not lock out. If the taps is then closed and re opens the same process happens. Hot for a short while than...
  15. D

    Salus rt500f

    Hi all im having to create this thread again as i am still having a problem trying to wire up this thermostat. My boiler is a biasi m90e24s and with the instructions that came with the unit for wiring 230v its not working. having seen the threads on here its not clear how it should be done, can...
  16. S

    Downstairs radiators cold

    Please can anybody help me! I've had a new worcester bosch combi 28cdi fitted, new radiators downstairs (one of which used to get hot but doesn't now). Honeywell thermostat, magnaclean. Downstairs radiators are stone cold - not even hot pipes to the rads. No air in the radiators - all bled...
  17. R

    need work experience to get my gas tickets

    Hi, I'm currently on the L3 gas utilisation course at lomax and I'm required to do 250 hours of work experience to get my gas tickets. I'm looking to help a gas engineer one day a week on a saturday. I'm not looking for any pay, just a good tutor to help me on my way. I spent last year at Tyne...
Back
Top