tile

Hi All, Currently renovating an old wetroom. 1. Removed everything back to brick. Currently, Have stud battened the walls, insulated the spacing and am now ready to apply the tile backer board, however, before I apply the tile backer board. Should I cover the insulation and battens with a...

To help prevent panels dropping later, I was thinking of glueing aquapanels to the stud (additional to screwing & edge glueing panels with proprietary glue). Any thoughts? Panels to be supported on horiz. rail anyway, so just run some Gorilla up the stud before fixing them?

I have a stud going in at each end of a bath and was wondering what thickness Aquapanel on the stud would best? To tile over. What does primer (BAL etc) actually do? Does it go on both sides? And what glue would I use to fix the Aquepanel to the stud (plus screws), would Gorilla be ok? Thank you.

In what order would you create a wet room? Renovation. I have stripped the old wet room back to brick. I just want your guys opinions on what order you would do things from materials used to completion. I will have concrete block benches, screed slope floor to the drain, and shower head mixer...

Hi everyone! New here, looking forward to being massively impressed with your immediate support! (I have zero time to decide on the below!)... We have to have our entire house rendered, much to our servere disappointment. Our bay window shingles. Part of the render agreement is to remove them...

Hi, Guys would like your advice and opinions please concerning my wetroom renovations. I have stripped the walls back to bare brick and removed the previous concrete screed. Sadly, the previous screen was done by someone who didn't slope it correctly allowing water to flow out of the wetroom...

Hi, We have an orangery 9 years old which is on pile foundations with suspended slab. we have porcelain tiles bedded to the concrete which have been in place since the build. Yesterday we heard a few loud and unusual crack sounds coming from the floor (when we weren’t in the room). Temp was...

Just wondering, why whenever I've pulled off tiles in my homes does tile adhesive always look like the photo. Is this just how tileing was done back in the day? Does make it easy to take them off the wall.

Hi, We have a recessed window in the bathroom which has a trickle vent at the top of the recess ( please see attached photo). We will be fitting a tile backer board to the underside of the lintel ( top of recessed window). This then means that when the tiles are fixed they would cover the...

I'm tiling a bathroom and now got to make the bath panel to be tiled? I was thinking to to make a structure panel in stud work and plywood 12mm, then tiling on it straight away. Would this work? is the plywood good enough for wet area?

I have to start tiling my upstairs bathroom and got opposite opinion between sticking hardiebaker or using ditra matting before applying the floor tile. What your opinion on this and what would be the best reliable way? Thanks

Rendered and skimmed wall, vinyl paint. What is the vest prep? It doesn't seem like a good surface to tile, maybe a good scoring with el diablo or a plasterers roughing out saw? Maybe bolster the skim off? What's the usual way to proceed? Thank you Dain

Location: UK Here is one of the original tiles. No idea what it is called in order to obtain a replacement. However, the idea is to repair one that is broken using a strong adhesive. Any advice on the best adhesive to use would be appreciated. Thanks in advance. Roof cap tile by Ryck...

Hey, I have this small section of external wall (see attched image) that I'd like to tile over with more modern looking stone split face tiles. I'm after some advice as to how best to prepare the area. I was originally thinking I would chisel off the existing stone but found the existing stone...

Hey all, After noticing a damp patch by the skirting board on the landing floor, which is just the other side of the shower wall/bathroom, I realised that there were hairline cracks through the grout in the lower tiles towards the bath. Bummer. I chased the grout out of the tiles at the...

Hi, Just removed my old T&G plank and at the beginning I though that below I had a very strong Concrete flooring but this is not the case. I made few trial hole and the drill bits goes in like a soft cream and what come out is a black soil. the all flooring does not sound very strong and my...

Hi there, I'll start with an apology - I'm sorry - you must be sick of this sort of question but I promise I have tried to find the answer online for hours! I've just removed the tiles from my bathroom and it's made a right mess of the plasterboard (down to the paper etc). For most of it, we...

It's about 335 O/A width and about 418 long so very simulare to a Redland but CRUCIALLY the top face is 300 wide (where Redland & Marley are 290). Help! Dain

Hi all, My bathroom floor has these lumps developing under the flooring. I first posted about it a few months ago and it seems to have extended. The flooring is raised further along the join of the tile and some thick, sticky brown material has come up. I believe this could be glue? I have...

Hi, We are getting the ground floor tiled - apx 80sqm in a bunch of rooms - and need to check a few things: Where do i need to put expansion joints? We have screed on the floor with the fibres, and in some places this has cracked over the past few months - should i put the expansion joint...