wireless thermostat

Hi all, Looking for some help please. I'm fairly capable but started confusing myself a little! System boiler in kitchen with wall mounted programmable controller for HW & CH, water tank upstairs in cupboard. I have a Salus 510RF wireless thermostat, which I am looking to mount on middle floor...

Hi, I'm currently installing the stated thermostat to a glow worm betacom 24c combi boiler. I've checked the wiring diagrams and done various google searches before I fully proceed, but just wanted one final check about the volt free installation. From what I can see I connect up the L and N...

Hi, I'm in a new build townhouse with an Ideal Logic Heat boiler, an ESI ES3247B controller and two heating zones both with wired ESI ESRTD3 room thermostats. Our upstairs room stat is in located in our master bedroom which gets a lot of sun and is generally much warmer than the rest of the...

Hello, I have a wireless thermostat ( British Gas SLT 2) which stopped working after being turned off over the summer. My boiler also showed a pressure of zero hence I have just topped up the pressure to 1 today. No lights are flashing on the boiler and hot water has been running fine. But when...

We continue to have problems with our Vaillant boiler which was installed last July; the company who installed it have still not managed to get our heating controls working. We had months with uncontrollable heating, and for the last few weeks have not been able to turn it off at all! Yesterday...

Hello, I know very similar questions have been asked but they haven’t covered this version of Slaus from what I have seen. I apologise if it has. I have a Valliant ecoTEC pro28 boiler which I believe has a Salus VBC600RX wireless thermostat. The boiler is a combi boiler which delivers hot...

This has been in the house from before I moved in 11 years ago. I've had some issues with it over the years, but generally it works ok. My current problem is that it is supposed to raise the temperature from what is displayed by pressing the Plus button. For the time period programmed in it...

Hi all, I wonder if you can advise please. I need to put a new combi boiler in a btl property. In the past I've always had main combi eco, then eco elites, installed. Just returned from local boiler supplier and been advised these have been phased out and now Main are selling the Compact line...

Hi all, Firstly i want to thank you all for reading this, I'm pretty stuck so any help would be amazing. I currently have an Independent c24 combi boiler. This boiler has never had a thermostat fitted so had the original red cable connection, the boiler has only ever had the timer switch...

Hi, I've bought a Honeywell CM700 wireless thermostat and want to fit it to a Main 24 HE boiler. The boiler has a timer clock already installed. Do I just completely unwire the timer clock and wire in the new receiver using the neutral, live and signal 1 and signal 2 feeds that used to be...

Hi Folks, I am replacing installing a Salus IT500 onto my current Gas Boiler. I'm pretty sure that my wiring is correct (but could be mistaking) When I select Manual the Boiler comes on and works using the Boiler Thermostat but when I go to Auto the light goes out and boiler shuts off. I...

Hi I wondered if someone would be able to confirm my approach or advise alternatively. I have a Y-Plan system comprising: British Gas 330+ Boiler BG UP2 Controller BG WR1 Wireless Receiver & Stat I want to fit a 3rd Generation Nest and am pretty confident with the connections, but want to...

Hi guys, I've got a Drayton Digistat SCR that's stopped working, meaning I can't turn my heating on. The transmitter (a 2RF) is fine and it has new batteries. The fault seems to lie with the receiver, which has no lights coming on at all. After a bit of searching online, I've tried turning the...

Hi All, We're in an absolute mess. Recently we've had a plumber come out to fix our heating and hot water. Both had stopped working. The first time he came, he changed a pump. This fixed the hot water - but the heating wasn't working. About a month later, he installed two new valves (Drayton &...

Hi I am sorry for resurrecting this issue but I am a bit lost and need help. Have a nest 3rd gen heatlink and I am replacing the current thermostat, a Honeywell ST900. I have connected the L /N correctly and the heatlink powers up but the pickle I face relates to the 2 wires coloured black and...

Hi Guys Bought new Tower RFNP wireless thermostat to replace old hard-wired one but have three wires coming from boiler and the thermostat receiver talks about needing 4 wires. What do I do? This is what the thermostat instructions say... For conventional heating installations, connections...

Hi, 1st post and I'm a bit of an amatuer (can do basic wiring) so be gentle... Basically I need to wire a 3rd generation Nest Heatlink to a Vaillant EcoTEC 937. Could someone please relate the Nest instructions to the boiler wiring diagram for me? I'm not sure which Nest instructions I should...

Hi, Currently in a house with a Baxi 80e combi boiler, which presumably at one time was connected to the Honeywell T6360B thermostat. At present the wire has been severed between the boiler and the thermostat, and the internal link between terminals 1 and 2 on the boiler has been connected...

Hi, first of all, great forum! Here's my situation. I have an old style (but fully working, serviced and reliable) gas central heating system, baxi boiler with hot water cylinder upstairs and a gravity fed tank in the loft. It has a danfoss set 5 programmer/controller. However the wall...

Hi there, I have a Horstman HrFS1 wireless thermostat that is now about 4 years old. Recently I get the feeling that it is showing the wrong temperature, lower than the actually room temperature by about a few degrees. The result of this means the heating seems to be on most of the time except...