125mm soil pipe to WC connection
- Thread starter BaileyA
- Start date
Sponsored Links
Why not?
Too small.
As it's plastic I think they have something like this.
http://www.rjpryce.com/Products/osma-toilet-pan-fittings/WV4S730W
Found one, found camera:
View media item 33947..View media item 33948
If you mean "Too small" based on 102 to 117mm that's the pan spigot range. The external fins, which are conical, are circa 125mm, the size the op requested.
There are no fins/gasket/seals on the Osma 4S730. How would it seal?
View media item 33947..View media item 33948
If you mean "Too small" based on 102 to 117mm that's the pan spigot range. The external fins, which are conical, are circa 125mm, the size the op requested.
There are no fins/gasket/seals on the Osma 4S730. How would it seal?
Sponsored Links
Looks ok, will it take a pan connector.
It should not need to. The end facing the camera will go into the OP's 125mm ID pipe. The other end will take a pan spigot of between 102 and 117mm OD.
Hopefully.
The fitting is currently in the concrete, so will need a Pan connector unless he can get an S trap pan.
Ah, forgot the concreted into floor bit.
Would need to use a Multikwik Multilink or a stub of 110mm soil pipe.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
