2.5mm cable into 1.5mm ?!

Interesting insight, thank you.

In my head, I can see myself telling me "the smaller cable it is, the less power you're allowed to use" :LOL:
 
Sponsored Links
The limiting factor in this case is most likely the B6 MCB in the consumer unit rather than the cable.

You don’t want to plug a hoover or circular saw into that socket but all the gear you mentioned is perfectly fine.
 
Sponsored Links
The limiting factor in this case is most likely the B6 MCB in the consumer unit rather than the cable. You don’t want to plug a hoover or circular saw into that socket but all the gear you mentioned is perfectly fine.
Indeed. 1.5mm² cable would happily carry the current of two or three "hoovers" or circular saws, but a 6A MCB would not be at all happy about that :)
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top