2 fused spurs of the ring

[diycooper]

Can you take 2 fuse spurs of the ring, if so am i right it saying they have to be run on seperate cable's ?

 

[EFLImpudence]

It depends on what you want to run off them.

 

[diycooper]

It depends on what you want to run off them.

One is for a whirlpool bath and other for the controls in a power shower run of a combi. Both say in the instructions to run them of a 13amp fuse spur.

I moved bathroom into one of the bedroom. The 2.5 mm socket ring cable is under the floor I was thinking of braking into this with a JB then adding to cables running to fuse spurs of this.

is this ok

 

[ban-all-sheds]

Have you applied for Building Regulations approval for this work?

 

[EFLImpudence]

You cannot run a power shower on a combi boiler.

 

[diycooper]

It is one of these I am running.

http://www.ebay.co.uk/itm/220673318...id=m570.l2736&_nkw=220673318559&_fvi=1&_rdc=1

You going to tell me I need a system boiler I guess.

 

[EFLImpudence]

Not what I had in mind for a power shower.

It does say it can be run off the mains (water) so alright then.

 

[phatboy]

You would have to use a maintenance free juntion box as it will be inaccessible. And you would need to take 2 separate spurs from the ring, as each of the 2 could use a total of 26amps, which is too much for a 2.5mm T&E.....

 

[diycooper]

You would have to use a maintenance free juntion box as it will be inaccessible. And you would need to take 2 separate spurs from the ring, as each of the 2 could use a total of 26amps, which is too much for a 2.5mm T&E.....

Thanks thats what I thought