- Joined
- 13 Oct 2009
- Messages
- 84
- Reaction score
- 0
- Country
I've bought a master and slave varilight remote dimmer in order to have a dimmer on an existing two way circuit.
Current wiring is as follows:
Switch1:
COM - orange
L1 - Light Grey/Blue
L2 - Dark Grey/Brown
Switch 2:
COM - brown
L2 - Dark Grey
L1 - Light Grey
Varilight instructions can be found here.
For 2-way it refers to a slave input being required between the two. (Fig 2)
Does this mean I cant get this working without additional cable between the two switches?
If I can, could someone please advise what needs to go where. I was hoping it was going to be a straight swap, but perhaps not.
Or to put it more simply, do COM/L1/L2 translate directly to LIVE/LOAD/SLAVE on the diagram?
Thanks in advance.
Current wiring is as follows:
Switch1:
COM - orange
L1 - Light Grey/Blue
L2 - Dark Grey/Brown
Switch 2:
COM - brown
L2 - Dark Grey
L1 - Light Grey
Varilight instructions can be found here.
For 2-way it refers to a slave input being required between the two. (Fig 2)
Does this mean I cant get this working without additional cable between the two switches?
If I can, could someone please advise what needs to go where. I was hoping it was going to be a straight swap, but perhaps not.
Or to put it more simply, do COM/L1/L2 translate directly to LIVE/LOAD/SLAVE on the diagram?
Thanks in advance.