21.5mm overflow

[adwt2004]

Guys,

Do you know of a reducing tee I could use to connect this pipe to a 40mm bath waste pipe? Can't find anything in the shops or online. They do sell them right?!

 

[denso13]

http://www.toolstation.com/shop/PlumbingHeating/Overflow/d20/sd2908
Tee piece with reducer?

 

[adwt2004]

Well, I have a 40mm pipe and was going to fit a tee to this for 21.5mm pipe to go in but can't see anything i could use. Any ideas?

do they sell tee's which are 40mm/40mm/21.5mm? Or is there something i can't use to insert into the 40mm tee that brings it down to 21.5?

 

[jay1]

Well, I have a 40mm pipe and was going to fit a tee to this for 21.5mm pipe to go in but can't see anything i could use. Any ideas?

do they sell tee's which are 40mm/40mm/21.5mm? Or is there something i can't use to insert into the 40mm tee that brings it down to 21.5?

use the overflow reducer shown in that link posted above.

 

[gigz]

If you buy a 40 mm x 40mm x 32mm reducing tee you can get a 32mm to 21.5mm reducing bush. I get them at Drainage Centre

 

[namsag]

Plumb centre sell exactly what your looking for without the need for reducers . Will get the part number for you and add it later.

 

[adwt2004]

Cheers namsag and everyone else

 

[namsag]

Here is the code your after, going to have to partially spell it as my key board is playing up..... F4134five. Cost just over £4 plus vat.

 

[adwt2004]

Thanks namsag, you're a star