Am looking to fit 32mm grey water (sinks/showers/taps/washing machine) inspection ports (in line with screw cap) allowing me to put a wet vac or a long wire inside and clean the gunk out. Don't know what it's called. Anyone know?
32mm waste pipe inspection port
- Thread starter TryAgain1
- Start date
-
- Tags
- 32mm inspection sink water
Rodding access, 32mm is for handbasins
Rodding or Cleaning Eye, Access Cap/plug. eg. https://www.wolseley.co.uk/product/...AJinRG5tFOQzpZ1rygHNvo-HeMDpTRV7mBNYlXeaGp40k
Thanks is there a 32mm Y solvent or compression fitting that this Access Cap/Rod goes with please?
All good Plumbers Merchants and the Shed's will have such an item. https://www.toolstation.com/solvent...6rZ7c7CAkhP8TMblWk60ZmifxxLmPd8AaAqdBEALw_wcB
If you want to have a rodding point on the run - if it's for a sink/shower/bath - then that will typically use 40mm waste pipe. If you want to use a 32mm rodding access then you'll need a 40mm Y piece and then a reducer on the rodding point leg for the 32mm rodding eye to fit into.
Can I also suggest, depending on what pipe is there already, that Aquaflow (TS) may not be the best choice for the fittings. For some strange reason they seem to have a slightly different ID size and don't seem to match with the other standard makers pipe and fittings, you may find it difficult to get Aquaflow to be a good fit on other makes of pipe.
I believe FloPlast do a 40mm 135Deg branch and will happily fit standard 40mm pipe
Can I also suggest, depending on what pipe is there already, that Aquaflow (TS) may not be the best choice for the fittings. For some strange reason they seem to have a slightly different ID size and don't seem to match with the other standard makers pipe and fittings, you may find it difficult to get Aquaflow to be a good fit on other makes of pipe.
I believe FloPlast do a 40mm 135Deg branch and will happily fit standard 40mm pipe
Good call, keep forgetting there are some rogue fitting about now, Solvent used to be standard across the Manufacturers. I used the TS link as wasn't sure if the Screwfix page would give all my details away!
Absolutely, I'm at a loss as to what Aquaflow are up to and why TS stock it. The only reason I can think of is to ensure that only their products can be used together/interchanged. It doesn't make sense though as I'm sure their products would be used more often if they were interchangeable with other brands.
On Screwfix delete anything after the ? mark at the end of the product number. All the stuff to the right is, for example, data related to how you found the site via a search engine
vs the version with extra stuff stripped out
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
