Started miss firing this morning and engine light flashing. Got it home and whipped out plug leads. Plug compartment soaked with rusty water. I dried it all out and started car and drove for a couple of miles, then same thing happened.
Took off rocker cover and cleaned out lots of dried rust. There are 2 core plugs in there, but I can't see anything untoward.
Would much appreciate any ideas for testing core plugs and/or for crack in cyl head in situ and if possible re sealing
Thanks in advance Bill
Took off rocker cover and cleaned out lots of dried rust. There are 2 core plugs in there, but I can't see anything untoward.
Would much appreciate any ideas for testing core plugs and/or for crack in cyl head in situ and if possible re sealing
Thanks in advance Bill