ACS: CCN 1

bster said:
so what is it if the gas fire requires 100cm2 regardless of the calculated requirement based onKw rating?


45seconds.....tick.tick.tick...

Then you would have to stick the notice on the hot coals :lol:
 
doitall said:
BOB.ELOD said:
kevplumb said:
go away you sorry pratt

24 kw is a toy try playing with 250kw

Where do you get 24 kw from you class the coal fire same as the gas fire minus 7kw which is if gas fire was 6.7kw x 2 = 13.4 kw - 7 = 6.4 x 5cm/s = 32cm/s. pratt

And if the coal fire is spilling, you stick an immediately dangerous sticker on both appliances and isolate them

so go find a 24kw fire then :roll:
 
smoke-full.jpg

easy
 
kevplumb said:
send them me i will do it free for

scuse me whilst i pee mesen laughing :roll:

scuse excepted this the only thing yea good at kevy boyo and wiping other members quotes off the forum wnen yea beaten once again.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top