A work colleague has borrowed a worktop jig and router etc from me to fit his kitchen worktops. He hasn't done them yet, but I have heard him say that he is joining solid wood worktops which have a small round top and bottom. He is going to use the mitre joint as used for post form tops but I thought I had read that there were better ways of joining wood tops, ie just taking off the rounded part off the female and putting a very small chamfer on the male etc. Just wanted to give him some advice before he dived in and used the wrong (or not the best) method. I believe there are also other problems, ie movement to ba taken into account with solid wood tops.