C
chaindaisy
POST DELETED
Alarm Bell Box rewire
- Thread starter Kdaley
- Start date
Hi there,
There is a single white wire/lead coming into the internal sounder, this then has three twisted wires coming out of it - a black/red one that goes to a red LED, as well as a red/red and a blue/yellow which are the disconnected wires, I have got the case off the control panel (grey box) to unveil a whole world of wires as well as access to multiple setting units.
I really appreciate all the help
KD
There is a single white wire/lead coming into the internal sounder, this then has three twisted wires coming out of it - a black/red one that goes to a red LED, as well as a red/red and a blue/yellow which are the disconnected wires, I have got the case off the control panel (grey box) to unveil a whole world of wires as well as access to multiple setting units.
I really appreciate all the help
KD
And yes I have the user code, the manager code and the engineer codes
galaxy 500 has an ouput next to the a/b line normally number 1 is the bell trip ( connect to high or low depending on volume required ) + to 12+ and tamper to a zone with a 1k resistor or across the tamper loop. post a picture of the control panel pcb.
Apologies for being inept but that just went over my head, I will get pics up tomorrow which may be of further help cheers
C
chaindaisy
POST DELETED BY CHAIN DAISY.
Hi both, basically I need the alarm in general working order to sell the house (the next owners can worry about the smaller details) so te easier the better cheers
C
chaindaisy
POST DELETED
Yes one of the red ones is twisted with a black then the other two red are twisted together
C
chaindaisy
POST DELETED
Hi there, the pics are now in my album
hopefullly they are now visable. As for the cores they are not really bare at the end but I have wire strippers if required.
Many thanks
[/img]
Many thanks
[/img]
C
chaindaisy
POST DELETED
C
chaindaisy
POST DELETED
Hi there I have had partial success, the red light in the sounder is coming on, do the setting sounds also come out of the handset panels?
I will have to have an experiment tomorrow and will get back to you.
I am really grateful for all the advice, I hope you will let me send you some beer tokens as a small gesture when we are all sorted out
I will have to have an experiment tomorrow and will get back to you.
I am really grateful for all the advice, I hope you will let me send you some beer tokens as a small gesture when we are all sorted out
C
chaindaisy
POST DELETED
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
