I've been gifted a lathe and have found an ebay vendor for 3 phase inverters, however I need to rewire the motor. It does take 240v according to the information plate (I've put some pics up here..):
http://zardoz.no-ip.biz/
I guess the three bridged terminals are the 240v ones. The three input wires are identically brown. Does it matter which one goes where? Should I bridge the 440v terminals when I'm done?
Thanks
http://zardoz.no-ip.biz/
I guess the three bridged terminals are the 240v ones. The three input wires are identically brown. Does it matter which one goes where? Should I bridge the 440v terminals when I'm done?
Thanks