- Joined
- 26 Nov 2007
- Messages
- 177
- Reaction score
- 0
- Country
People,
It would be greatly appreciated if someone could confirm if the following electrical alterations to my residential dwelling are notifiable or not:-
1 Fitment of an inline fan in the loft to extract air from the bathroom. The fan itself will be mounted on a board in the loft (and not mounted on the topside of the bathroom ceiling). It will be controlled by a wall mounted switch outside the bathroom and will have an overrun timer and fan isolator.
2. Fitment of shaver socket in bathroom.
3. Fitment of new bathroom lighting circuits including downlighters. There will be two separate circuits each with it’s own wall mounted switch outside the bathroom. There will be downlighters in Zones 1, 2 and 3 which are all Zone 1 spec.
4. Fitment of underfloor heating mat in bathroom. There will be a new spur created from the upstairs ring which will be used to feed the control module which will be positioned outside of the bathroom.
5. Fitment of mirror with lighting in bathroom.
6. Additional sockets to upstairs circuit. These maybe either spurs or additional sockets in the ring.
7. Fitment of new lighting circuits in bedroom.
Many Thanks
Need Help21
It would be greatly appreciated if someone could confirm if the following electrical alterations to my residential dwelling are notifiable or not:-
1 Fitment of an inline fan in the loft to extract air from the bathroom. The fan itself will be mounted on a board in the loft (and not mounted on the topside of the bathroom ceiling). It will be controlled by a wall mounted switch outside the bathroom and will have an overrun timer and fan isolator.
2. Fitment of shaver socket in bathroom.
3. Fitment of new bathroom lighting circuits including downlighters. There will be two separate circuits each with it’s own wall mounted switch outside the bathroom. There will be downlighters in Zones 1, 2 and 3 which are all Zone 1 spec.
4. Fitment of underfloor heating mat in bathroom. There will be a new spur created from the upstairs ring which will be used to feed the control module which will be positioned outside of the bathroom.
5. Fitment of mirror with lighting in bathroom.
6. Additional sockets to upstairs circuit. These maybe either spurs or additional sockets in the ring.
7. Fitment of new lighting circuits in bedroom.
Many Thanks
Need Help21