B and Q drawer fronts

[roofmog]

A rather specific problem, but hopefully somebody else has experienced it. I have just brought a 500mm B and Q floor cabinet along with the suggested 3 drawer front pack. The drawer fronts fit to the standard B and Q drawer packs and there is one smaller top drawer front and two larger middle and bottom fronts. However, the cabinet walls only have pilot holes for the top drawer runners. There is absolutely no indication where to fit the runners for the other two drawers. If you fit the front to the middle drawer and align it under the top drawer it is impossible to see where the runners should be. Has anyone else had this problem and how did they solve it

 

[foxhole]

Enclosed leaflet should give all measurements required, if not you need to speak to B&Q.

 

[roofmog]

You would have thought so, however the cabinet instructions only show how to attach a top drawer and door, and the drawer pack had no instructions at all.As you say, a call to B&Q is in order.

 

[joinerjohn]

Yep, their instruction leaflet inside, usually has the measurements on it for 3 drawer packs. Call in at your local B&Q and ask customer services for a leaflet detailing the fitting instructions.