Bathroom fan and light

[backupnorth]

Need to fit bathroom fan and light but switch must be dual so that I can also have a kitchen light switch. Can't find dual DP switch to wire fan as shown in sticky. Is this method OK? I appreciate that when I use FSU to isolate fan I also isolate light. Guess only work on it in daylight.

PS many thanks to all the fantastic advice from the regular contributors, without whom, I would never have got this far in re-wiring the house.

Untitled

• backupnorth
• 30 Aug 2012
• 1

[/img]

 

[dingodeano]

Are you running the light / fan from socket curcuit?

 

[EFLImpudence]

Just take 3core + E from the ceiling rose (PL SL N & E) and install necessary accessories and then to fan.

You can get 3 pole isolators with fuse.

 

[EFLImpudence]

You can get 3 pole isolators with fuse.

I wrote that after reading such elsewhere but the only thing I can find is

which is a Click mode grid switch from Scolmore.

 

[backupnorth]

thanks guys

running from lighting circuit

MK do a dual DP switch but it is for immersion heater and had engraved labels on it

will look at switch