Hi all, hope someone can help! I have a Baxi 105e boiler and without warning we have no hot water. The central heating is working fine.
Thinking it might be the diaphragm, I checked to see if the pin was coming out to hit the microswitch when the hot water was turned on. The pin isn't coming out of the housing at all. However, when I bypass this by manually pushing in the microswitch pin, I can hear the microswitch clicking on but I still get no hot water.
I've called around to find a boiler engineer, but no one is available for at least 3 days so I'd like to tackle this myself, if it's within my capabilities. Can anyone advise what the next steps are to track down the problem?
Thinking it might be the diaphragm, I checked to see if the pin was coming out to hit the microswitch when the hot water was turned on. The pin isn't coming out of the housing at all. However, when I bypass this by manually pushing in the microswitch pin, I can hear the microswitch clicking on but I still get no hot water.
I've called around to find a boiler engineer, but no one is available for at least 3 days so I'd like to tackle this myself, if it's within my capabilities. Can anyone advise what the next steps are to track down the problem?