the pressure is not rising into the red, but the radiators are not getting hot now. The heat flow pipe coming from the boiler is hot though as is the pump. The radiators have been bleed and valve on radiators also are open
The hotwater function works perfectly fine
the pressure is not rising into the red, but the radiators are not getting hot now. The heat flow pipe coming from the boiler is hot though as is the pump. The radiators have been bleed and valve on radiators also are open
The hotwater function works perfectly fine
I put a new PRV on. But there still seems slight leak of pressure dropped about 0.2 bar over 3 to 4 days. No visible leaks on the boiler. Not done the balloon trick on the external relief pipe yet. Is there anything else I need to check?
The heating and hot water seems to be working fine.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local