Hi,
I have a Camray 15/19 wall hung boiler. When the service engineer came to service this the baffle box end had melted! I think this box has been put in the wrong way round. According to the picture in the service manual it shows the end plate with the large centre hole furthest away from the burner but this service engineer advises me that it should be closest to the burner.
I ahve opened up the boiler today and to my dismay the end plate has started to melt again. Which way does this go round? Worcester can't help me one bit as the boiler is obselete.
Someone here must have serviced one of these boilers recently?
I have a Camray 15/19 wall hung boiler. When the service engineer came to service this the baffle box end had melted! I think this box has been put in the wrong way round. According to the picture in the service manual it shows the end plate with the large centre hole furthest away from the burner but this service engineer advises me that it should be closest to the burner.
I ahve opened up the boiler today and to my dismay the end plate has started to melt again. Which way does this go round? Worcester can't help me one bit as the boiler is obselete.
Someone here must have serviced one of these boilers recently?