Can anyone tell me if this is usual finishing to Fascia/soffit/guttering replacement

[Josephineyy]

I feel like the finish on the soffits are hugely different to my neighbour and that the gutter is wavy and missing end pieces?

TIA

 

[Harry Bloomfield]

I feel like the finish on the soffits are hugely different to my neighbour and that the gutter is wavy and missing end pieces?

Maybe the photo, or shadow, but it looks as if the soffit lengths have all been cut too short, and they look old?

The gutter looks as if it is not straight, even has a fall to the right, rather than having a slight, but continual fall to the left, to the hopper and drain pipe. Could you climb onto the scaffold, and sight it along, from the stop end on the right?

Gutters should be absolutely straight, but with a slope to the discharge of around 1:350, or 1/2" or so in 8 feet, to best allow debris to wash down. No dips anywhere.

 

[Josephineyy]

Maybe the photo, or shadow, but it looks as if the soffit lengths have all been cut too short, and they look old?

I think they’re too short, and not even all equally short. All the pvc is new.

The gutter looks as if it is not straight, even has a fall to the right, rather than having a slight, but continual fall to the left, to the hopper and drain pipe. Could you climb onto the scaffold, and sight it along, from the stop end on the right?

I’ll try and get up there tomorrow and upload some pictures