Can I fit a plume management kit on the flue myself?

[Taconite5]

It's a 10min job, pull nose out of flue, drill hole for PMK, fit PMK go home.

Does £240 sound right for a job then? You can buy the basic kit in Screwfix for £95.

 

[Deleted member 267285]

Pic for info

Unsure if this has been asked, why do you want/need one?

 

[Taconite5]

Unsure if this has been asked, why do you want/need one?

Fed up of the plume going in my face when I go out of the door!

Plus is sets the PIR off.

 

[kidgreen61]

Does £240 sound right for a job then? You can buy the basic kit in Screwfix for £95.

Yes

 

[Pin 5]

One of the new bellway estates?

 

[Taconite5]

One of the new bellway estates?

Haha! How did you know?

 

[Pin 5]

Worked on a few of them for the cylinder manufacturer that's in so e of them. Are the lads still not on site? They'll usually do a job for the homeowners.

 

[Taconite5]

Worked on a few of them for the cylinder manufacturer that's in so e of them. Are the lads still not on site? They'll usually do a job for the homeowners.

Yeah they are. I rang the head office of the plumber company and they said they don’t do residential customers. I’ll try and speak to one of them. You reckon they could do a job on the side for a bit of cash? They’d do all the certificates etc?

 

[Pin 5]

One of the lads would do it. But they tend to only have one commissioning guy that comes in to make sure everything's ok. You wouldnt need a new cert. Just checking that it's safe with the correct tools.

 

[Taconite5]

One of the lads would do it. But they tend to only have one commissioning guy that comes in to make sure everything's ok. You wouldnt need a new cert. Just checking that it's safe with the correct tools.

Thanks. I’ll try.

Bellway site manager tends walk around so hopefully I can catch one of them separately!