Can we use an in wall extractor instead of an over hob extractor hood?

Joined
26 Jul 2014
Messages
131
Reaction score
7
Location
Warwickshire
Country
United Kingdom
Hi

We are putting a kitchen in a new extension. We don’t want a typical hob extractor over the hob. Can we use a fan extractor in a wall, like you get in bathrooms, that vents to the outside and still comply with ventilation building regs?

If so can the fan be located in any external wall in the kitchen or does it still have to be over the hob?

Many thanks for any help.
 
Sponsored Links
I did exactly this in a kitchen extension, BC were fine with it. We never used the fan mind, as it was across on the opposite wall of the extension, what would be the point? :)
 
D614FC13-398F-4C4F-9603-11619DC2DA7F.jpeg
 
The requirement is for a fan, not where it goes. However if the fan is not a hood over the hob it will need higher performance - 60 l/s instead of 30 l/s for a hood.
 
Sponsored Links
An advantage of a hood is that you won't end up will steam on the ceiling (which will leave stains).

We recently had new kitchen fitted. The new hood is pants. We have brown stains on the ceiling that never previously occurred with the old hood. A fan only option (for us) would be even worse.
 
IKEA are selling a hob with in integrated fan in one. It is designed to have nothing on the top.

 
downdraught suckers are not much good, and are noisy.

a hood will catch fumes and steam that drift up from the cooking

preferably it will be larger than the cooking surface to catch sideways drift

your view will not be obstructed if you have the sense to put the hood at a height where you cannot bang it with your face while stirring your porage.

or a bridging unit that conceals a canopy extractor inside a matching cabinet
 
IKEA are selling a hob with in integrated fan in one. It is designed to have nothing on the top.

Great as long as it's on an outside wall as opposed to the shiny and new one shown in the brochure. Charcoal filtered extractors, whether they are mounted above or on the hob, will not satisfy reg's.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top