1. Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.
    Dismiss Notice

can you change the direction of feed pipe on Neff dishwasher?

Discussion in 'Appliances' started by marksutton, 8 May 2021.

  1. marksutton

    marksutton

    Joined:
    18 Jun 2011
    Messages:
    3
    Thanks Received:
    0
    Location:
    West Midlands
    Country:
    United Kingdom
    hi there, the cold water feed pipe on my dishwasher is angled at 45 and means the pipe can only exit to the right hand side of the machine. Unfortunately my supply tap is on the LEFT. I need the machine to go hard against the wall as it is 60cm deep so the pipes have to remain in the space at the bottom, and i dont really want to fit an extension feed pipe so that the pipe loops back on itself. The plastic bracket where the pipe goes inside the machine unclips fairly easily, but it doesnt LOOK like there is anything you can do to rotate the bracket 180, which is what i would like to do..
    Has anyone done this?
    thanks
    Mark
     
  2. Sponsored Links
  3. Swwils

    Swwils

    Joined:
    2 Jul 2020
    Messages:
    350
    Thanks Received:
    71
    Country:
    United Kingdom
    Picture please.

    Unlikely it cannot just be loosened, moved then tightened.
     
Loading...

Share This Page