Hello everyone, I need some advice
I have ordered a plug in hybrid BMW and need a home charge point. The BMW garage have passed me onto a third party who will install as part of a grant, however I have been told they must install a secondary consumer unit at my cost?
My current consumer unit is a 16th edition crabtree with most circuits on the RCD side.
Only exceptions are the downstairs lights on the un protected side but on a rcbo and the smoke and doorbell circuits on standard mcb.
I have one spare way in the board on the non RCD protected side, surely they can just use that with a suitably sized RCBO?
Thanks
I have ordered a plug in hybrid BMW and need a home charge point. The BMW garage have passed me onto a third party who will install as part of a grant, however I have been told they must install a secondary consumer unit at my cost?
My current consumer unit is a 16th edition crabtree with most circuits on the RCD side.
Only exceptions are the downstairs lights on the un protected side but on a rcbo and the smoke and doorbell circuits on standard mcb.
I have one spare way in the board on the non RCD protected side, surely they can just use that with a suitably sized RCBO?
Thanks