- Joined
- 16 Apr 2020
- Messages
- 23
- Reaction score
- 0
- Country
Hi all, about to replace my ceiling light. It's the first time I've replaced a light and was hoping it'd be straight forward with a like for like wire replacement. Electricity has been switched off as course.
I've taken the light casing off and im greeted with 2 red, 2 black and 1 grey wire. Presumably some sort of loop but not sure what? There's only one switch in this room and no other switches outside control it.
Can anyone guide me to which wires I need to connect. I stupidly forgot to take a picture of the light fitting before I disconnected it.
Pics attached. New light has a standard 3 wire connection.
Cheers
Phil
I've taken the light casing off and im greeted with 2 red, 2 black and 1 grey wire. Presumably some sort of loop but not sure what? There's only one switch in this room and no other switches outside control it.
Can anyone guide me to which wires I need to connect. I stupidly forgot to take a picture of the light fitting before I disconnected it.
Pics attached. New light has a standard 3 wire connection.
Cheers
Phil
Last edited: