Central Heating Programmer-Help please

Joined
13 Dec 2020
Messages
1
Reaction score
0
Country
United Kingdom
I am looking for a Central Heating Programmer for an oil fired system.
Does any company make/supply the old fashioned type which has a dial with tappets?
I.E the type where you push in for On and out for Off. It has to be dual channal.
It is for an elderly person who cannot manage the new fangled digital ones.
 
Joined
27 Jan 2008
Messages
19,499
Reaction score
1,853
Location
Llanfair Caereinion, Nr Welshpool
Country
United Kingdom
Danfoss3060programmer.jpg like this? Never bothered putting in the bin. But isolating so don't know how I could get it to you.
 
Sponsored Links
Joined
27 Jan 2008
Messages
19,499
Reaction score
1,853
Location
Llanfair Caereinion, Nr Welshpool
Country
United Kingdom
I seem to remember there were 16 and 10 program mode depending if thermo syphon DHW or pumped, with a mechanical stop and a switch that allowed you to select which. And that option is there with the one @picasso has linked to. I would guess this one
9448P_P
would also have the interlock option. But it one one of the first jobs I did replacing the old programmer (timer) for some thing that would swap temperature rather than simply turn off. I still have a large display, and a simple turn the dial to increase or decrease temperature Bacteria Prevention.jpg but it does not turn off at a set time, it turns down. But these
18470_P
are still sold in Screwfix, the main problem was they got noisy as they got old.
 
Sponsored Links
Top