Chop saw calibration

[mattchip]

Any other chips find they need to re calibrate your chop to cut 90 degree straight cut ,i've got the makita and it needs a bit of fine tuning from time to time,
i just get an off cut and set it off 90 slightly to re alingn it, bit annoying though

 

[Burnerman]

I've got an SIP radial arm and a DeWalt chop saw and yes, they need setting up frequently - usually after a trip in the van. John

 

[jmshep]

I use one of these for my saw and a whole lot of other jobs. Wouldnt be without it.
http://www.machine-dro.co.uk/index.php?target=products&product_id=7