1. Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.
    Dismiss Notice

Combined respirator and goggles

Discussion in 'Tools and Materials' started by stealthwolf, 22 Oct 2019.

  1. stealthwolf

    stealthwolf

    Joined:
    20 May 2015
    Messages:
    528
    Thanks Received:
    34
    Location:
    Birmingham
    Country:
    United Kingdom
    Will be up in the loft finishing off the boarding. The boards I'd fitted last time were standard sized. I need to add extra boards that will need to be trimmed.

    I'll be up there with a circular saw and my CTL-midi dust extractor. What would be good for lung and eye protection?
     
  2. Mottie

    Mottie

    Joined:
    27 Feb 2017
    Messages:
    4,296
    Thanks Received:
    490
    Location:
    Essexshire
    Country:
    United Kingdom
    Could you not cut them outside in the open?
     
  3. Sponsored Links
  4. Ryler

    Ryler

    Joined:
    21 Oct 2019
    Messages:
    781
    Thanks Received:
    41
    Country:
    United Kingdom
    I have the APF 10 Evolution which is sold by axminster. Its expensive.
    Though I work with asbestos sometimes so in effect cheap.
     
    Last edited: 22 Oct 2019
    • Thanks Thanks x 1
  5. stealthwolf

    stealthwolf

    Joined:
    20 May 2015
    Messages:
    528
    Thanks Received:
    34
    Location:
    Birmingham
    Country:
    United Kingdom
    The boards need to be different lengths (think staggered set up). I figured it’d be easier to do it all in one go instead having to go up and down into the loft.
     
  6. Sponsored Links
Loading...

Share This Page