• Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.

Concrete tiles on roof crooked?

Joined
19 Jul 2023
Messages
8
Reaction score
0
Country
United Kingdom
Hi all

Bottom 2 rows of tiles on our roof seem crooked. We’ve got an issue with the bottom row not been gauged out properly and this is now going to be rectified it’s far too close to the gutter. Roof was done way before we moved in.

The row above the first just seems like this is also sitting at an angle? Could this be due to the first course been done wrong? And this could rectify it?
IMG_6113.jpeg
IMG_6113.jpeg
 
Hi all

Bottom 2 rows of tiles on our roof seem crooked. We’ve got an issue with the bottom row not been gauged out properly and this is now going to be rectified it’s far too close to the gutter. Roof was done way before we moved in.

The row above the first just seems like this is also sitting at an angle? Could this be due to the first course been done wrong? And this could rectify it?View attachment 399793View attachment 399793
Probably down to a rubbish roof build, i.e. differing length rafters and the subsequent twisted gauge of the tile battens to compensate.

I re-roofed a single storey kitchen extension in the summer, that was very badly built. The brickwork was so bad, that they had to mess about with the roof (rafter lengths) so as to disguise dodgy brickwork and make the soffit appear to be even. I re-built the roof with equal length rafters. The soffit width varied 100mm along its 6m length once the roof was built (correctly)
 
Seems to be Marley Modern ie The King of the Roof Tiles, so a bit of wonkiness can be tolerated if the aesthetics don't bother you.
 
That's the problem when things are not made of plastic in a factory out of perfect moulds.

But I suppose the gutter bowing up does not help the aesthetic - despite being much easier to fix.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top