- Joined
- 30 May 2006
- Messages
- 1
- Reaction score
- 0
- Country
I am replacing a built-in electric oven and have an existing electric hob. When I disconnected the old oven I found that the wiring of the hob was connected to the oven itself.
Do I wire both 6mm cables into the existing cooker panel. This is what the DIY book says, but to get both sets of wiring into the live and neutral holes is extremely tight. Do they make a cooker panel with separate capacity for both oven and hob wiring?
Do I wire both 6mm cables into the existing cooker panel. This is what the DIY book says, but to get both sets of wiring into the live and neutral holes is extremely tight. Do they make a cooker panel with separate capacity for both oven and hob wiring?
