Hi all, wonder if anyone can help with what is probably a simple question.
I recently installed a Cooke & Lewis kitchen, Carisbrook in design.
http://www.cookeandlewis.co.uk/kitchens/carisbrooke_country
The frames are fitted with a sort of L bracket, but not at 90 degrees.
One side plugs into the frame, the other side is screwed to the carcass.
It works fine on the left side, but cannot get the right side in. I popped out the fitting, put the frame in place and then half managed to get the bracket in the hinge hole.
When i then screw the frame to the carcass, the frame is loose and fitting falls out. I've used plastic fittings and made it solid now.
Where did i go wrong?
I recently installed a Cooke & Lewis kitchen, Carisbrook in design.
http://www.cookeandlewis.co.uk/kitchens/carisbrooke_country
The frames are fitted with a sort of L bracket, but not at 90 degrees.
One side plugs into the frame, the other side is screwed to the carcass.
It works fine on the left side, but cannot get the right side in. I popped out the fitting, put the frame in place and then half managed to get the bracket in the hinge hole.
When i then screw the frame to the carcass, the frame is loose and fitting falls out. I've used plastic fittings and made it solid now.
Where did i go wrong?