- Joined
- 25 Nov 2003
- Messages
- 9
- Reaction score
- 0
- Country
I currently have an electric cooker (and hob) in my kitchen with a 6mm cable running from the RCD to the cooker isolation switch and then to the cooker. I am replacing the cooker with an electric oven (3.0 kW nominal power, requiring a 13 amp power supply) and gas hob.
I need to extend the run of cable from the isolation switch and as i don't really need 6mm cable is it safe to use a smaller diameter cable or should i just use 6mm anyway?
Thanks in advance,
Martin
I need to extend the run of cable from the isolation switch and as i don't really need 6mm cable is it safe to use a smaller diameter cable or should i just use 6mm anyway?
Thanks in advance,
Martin