Cooker Controls...

[dom_424]

Hey,

I have just connected my new electric hob to the 45A cooker control unit to soley run it, but i need another connection for the oven. The oven is rated at 2300W (10A), can i connect this to an exisiting fused spur to run, or do i need to get a new spur run from the CCU???

 

[JohnD]

If it is only 10A you can use a 13A plug or an FCU, new or existing at your choice.

 

[securespark]

If you run it from the cooker circuit, the cable feeding the spur must be suited to the protective device.

 

[Steve]

If you run it from the cooker circuit, the cable feeding the spur must be suited to the protective device.

This is what I did, take 2 cables from the CCU and feed one to the hob, the other to a single unswitched socket for the oven.